Parts for ResMed CPAP/BiLevel Machines
-
-
$89.00
ResMed's DC-24 Converter allows you to operate S8 VPAP BiLevel machines, that are designed for 24 volt DC power sources, from 12 volt DC power sources like the "cigarette" style sockets found in most cars, boats and other vehicles. This is the only cord that should be used with these ResMed systems. Compatibility Information: This cord is compatible with all VPAP S, VPAP ST and VPAP Auto 25 … [Read More]
-
-
-
$12.50
This SD Data Card is compatible with all PR System One CPAP/BiPAP machines that include data card capabilities including the PR System One REMstar Plus, PR Sytem One REMstar Pro, PR System One REMstar Auto, PR System One BiPAP Pro, the PR System One BiPAP Auto, and the PR System One BiPAP ST. It is also compatible with SD Card enabled ResMed S9™ and DeVilbiss IntelliPAP CPAP/BiLevel Machine … [Read More]
-
-
-
$16.95
This is the Flip-Top Lid (Cover) with Seal that closes and covers the removable humidifier chamber used on all H4i Humidifiers as well has HumidAire 3i Heated Humidifiers that have been upgraded using the H4i Upgrade Kit. … [Read More]
-
-
-
$14.95
This is the Flip-Top Lid (Cover) and Seal that closes and covers the removable humidifier chamber used on all HumidAire 3i Heated Humidifiers. Usage Information: If you have upgraded your HumidAire 3i to an H4i using the H4i Upgrade Kit then you will need the newer Top Cover Lid & Seal part number 26953. … [Read More]
-
-
-
$4.45
ResMed's S9 Filters are disposable and should be changed regularly when soiled. These filters are original ResMed filters made from Polyester fibers. (HypoAllergenic filters are available elsewhere on this site.) Dimensions: Approximately 2.125 Inches by 1.4375 Inches. Compatibility: All S9 Series CPAP/BiLevel Machines S9 Escape S9 Elite S9 AutoSet S9 VPAP S S9 VPAP A … [Read More]
-
-
-
$4.95
ResMed's S9 Filters are disposable and should be changed regularly when soiled. These filters are original ResMed filters made of non-woven acrylic and polypropylene fibers with a polypropylene carrier. (Standard polyester fiber filters are also available separately on this site.) Dimensions: Approximately 2.125 Inches by 1.4375 Inches. Compatibility: All S9 Series CPAP/BiLevel Mach … [Read More]
-
-
-
$7.95
This Filter Cover snaps onto the back of all S9 CPAP/BiLevel Machines to cover the filter compartment. It will also help protect the device in the event of accidental liquid spillage. The filter and filter cover should be fitted at all times when using any ResMed S9 Machine. … [Read More]
-
-
-
$59.95
ResMed's S9 Series CPAP machines use an external power supply with AC Power Cord. There are two versions of the power supply: a 90W version which is supplied as standard with the system, and a 30w version available as an optional accessory. Both power supplies are designed for universal inputs of 100-240V, 50-60Hz and can be used in most countries around the world with the proper local plug adapt … [Read More]
-
-
-
$32.00
ResMed's SlimLine tubing is the lightest, slimmest and most flexible CPAP/BiLevel tube on the market. 40% lighter than traditional tubing, SlimLine tubing eliminates drag on your mask and weight on your bed helping to improve overall mask fit and sleep comfort. SlimLine tubing also features a new smart-fit cuff design that makes it easier to attach and remove the tubing from your machine and mask … [Read More]
-
-
-
$51.00
If you use an H5i Heated Humidifier with your S9 Series CPAP/BiLevel machine then you can select ClimateLine heated tubing for truly exceptional comfort. The ClimateLine tube features a temperature sensor at the mask end of the tube. You set your preferred humidity and optimum temperature levels and the S9 Climate Control system adjusts your therapy to suit. Because the system measures temperatur … [Read More]
-
-
-
$10.45
This custom hose / tubing cover is designed exclusively for use with ResMed's SlimLine and ClimateLine tubing. The Tubing Wrap will help insulate the hose from cooler outside air. In addition it improves the overall feel and look of the CPAP tubing on the bed. This Tubing Wrap is made of gray insulated nylon material and includes a zipper along the length of the wrap making it easy to attach and … [Read More]
-
-
-
$34.95
The sleek "laptop style" S9 travel bag comes complete with carry handle and shoulder strap for ease of use. Inside the bag is surprisingly spacious with individual compartments for the S9, the H5i Humidifier, and accessories (such as tubing, power supply and mask). … [Read More]
-
-
-
$244.00
The H5i Heated Humidifier offers relief from dryness and congestion and integrates seamlessly with ResMed's S9 Series of CPAP/APAP systems. Intuitive and easy to use, the H5i's adaptive Climate Control system intelligently adjusts to changes in environmental conditions delivering optimal temperature and humidity right to the mask. The H5i protects you from rainout without compromising humidity and provides the most comfortable therapy possible. [Read More]
-
-
-
$22.95
This standard, one piece, H5i Humidifier Water Chamber will last for 6-months on average. The aluminum base of the chamber should NOT be removed for cleaning. These chambers are compatible with all H5i Heated Humidifiers. Each chamber will hold 380 ml of water (when properly filled to the fill line). Chambers should be filled with clean water each night. Using distilled water is not required, … [Read More]
-
-
-
$32.95
This long life "cleanable" chamber will last for 2-years on average. This chamber is dishwasher safe and is easy to disassemble and reassemble for thorough cleaning. The base of the long life chamber is made of stainless steal to make it more long lasting. These chambers are compatible with all H5i Heated Humidifiers. Each chamber will hold 380 ml of water (when properly filled to the fill lin … [Read More]
-
-
-
$3.95
This silicone seal / gasket is used with H4i Long Life Humidifier Chambers to seal the top of the chamber (tub) to the bottom chamber plate, thus preventing water leakage. It should be inserted into the groove on the water chamber whenever the chamber is in use. The gasket can be cleaned with mild detergent and allowed to dry out of direct sunlight. It should be replaced if yellowed, or cracke … [Read More]
-
-
-
$49.95
ResMed's S9 Series CPAP/BiLevel machines use an external power supply with AC Power Cord. There are two versions of the power supply: a 90W version which is supplied as standard with the system, and a 30w version available as an optional accessory. Both power supplies are designed for universal inputs of 100–240V, 50–60Hz and can be used in most countries around the world with the proper local pl … [Read More]
-
-
-
$367.00
The Long Life Rechargeable CPAP/BiLevel Battery Pack provides the ultimate in power, portability and convenience when combined with your CPAP/BiLevel system. Enjoy up to 24-hours of run time between charges! Take your CPAP/BiLevel on vacation, camping, on the road, or just about anywhere else! This package includes a carrying case, a standard AC Power Cord for recharging from US Wall Sockets, and a DC Cord for powering your ResMed CPAP/BiLevel Machine from the battery pack or any 12V DC power socket. [Read More]
-
-
-
$84.95
ResMed's DC Converter allows you to operate any S9 CPAP/BiLevel Machine (with or without the H5i Heated Humidifier and ClimateLinte tubing) from a 12V or 24V DC Power Source like those found in many cars, boats, trucks and other vehicles. This complete cord measures approximately 7.5 feet. Resources: ResMed's S9 DC Converter User Guide (PDF) Usage Information: This cord is only design … [Read More]
-
-
-
$5.00
These original two-color ResMed filters and are compatible S8, S7 and Tango Series CPAP/BiLevel machines. These HypoAllergenic filters are disposable and should be changed regularly when soiled. (Standard filters are also available.) Dimensions: Approximately 1.75 x 1.25 x .75 Inches. Compatibility: All S8 Series CPAP/BiLevel Machines S8 Compact S8 Escape / Escape II S8 Eli … [Read More]
-
-
-
$7.95
This is a replacement yellow cleaning plug for all HumidAire H4i Humidifier Chambers. The plug is used to seal the humidifier chamber for cleaning or when traveling. Once the plug is in place mild soap can be added for cleaning and the chamber can be shaken without spilling. The plug can also be used to temporarily seal the chamber when travelling to help prevent minor spills from undried water d … [Read More]
-
-
-
$51.00
If you use an H5i Heated Humidifier with your S9 Series CPAP/BiLevel Machine then you can select ClimateLine MAX heated tubing for truly exceptional comfort. ClimateLine MAX tubing is slightly wider than standard ClimateLine tubing so that it can support the higher pressure levels often used by BiLevel/VPAP therapy users. The ClimateLine MAX tube features a temperature sensor at the mask end o … [Read More]
-
-
-
$19.95
This plastic lid is the top cover for ResMed's H5i™ Heated Humidifiers. Usage Information: This lid does not include the clear silicone seal (Part 36892) that sits between the chamber and the lid. That item can be purchased separately on this site. … [Read More]
-
-
-
$7.95
This silicone gasket fits between the Flip Lid and the Water Chamber on all H5i Heated Humidifiers to create a seal. The Flip Lid seal should be cleaned monthly and replaced whenever it appears cracked or torn. … [Read More]
-
-
-
$9.95
This replacement Hose Tubing Coupler with Retainer Clip is designed for use with all H5i Heated Humidifiers. The Tube Coupler extends out of the back of the humidifier where the main breathing tube is attached to the machine. If the coupler or retaining clip are broken then they should be replaced immediately. … [Read More]
-
-
-
$10.25
ioGear's SD Data Card Reader is simple, durable, compact and convenient. It is compatible with the SD Data Cards found in all ResMed's S9, Philips Respironics' PR System One, and DeVilbiss' IntelliPAP CPAP and BiPAP machines. To download therapy data to your computer simply insert the SD Data Card from your CPAP or BiPAP into the appropriate slot on the card reader. Once the data card has been in … [Read More]
-
-
-
$12.00
This Pressure Sensor Adapter is used to regulate therapy pressure at the mask on S7 Elite, AutoSet Spirit, and AutoSet Response CPAP Machines. Usage Information: This adapter should NOT be used when using the CPAP with a HumidAire Humidifier. … [Read More]
-
-
-
$13.95
This Pressure Sensor Line Adapter is required for use on the ResMed AutoSet-T Auto-CPAP machine. It is placed between the CPAP and the six foot hose with the pressure line connected to the CPAP as shown. … [Read More]
-
-
-
$75.00
ResMed's DC-12 Converter allows you to operate S8 CPAP/BiLevel machines from 12 volt or 24 volt DC power sources like the "cigarette" style sockets found in most cars, boats and other vehicles. This is the only cord that should be used with these ResMed systems. Compatibility Information: This cord is compatible with all S8 Escape, S8 Escape II, S8 Elite, S8 Elite II, S8 AutoSet Vantage, S8 … [Read More]
-
-
-
$12.00
These white fiber filters are designed for use with all ResMed AutoSet-T machines. Each filter measures approximately 4 x 2.5 inches. AutoSet-T filters are disposable and should be changed regularly when soiled. … [Read More]
-
-
-
$4.00
These original two-color ResMed filters and are compatible S8, S7 and Tango Series CPAP/BiLevel machines. These Standard filters are disposable and should be changed regularly when soiled. (HypoAllergenic filters are also available.) Dimensions: Approximately 1.75 x 1.25 x .75 Inches. Compatibility: All S8 Series CPAP/BiLevel Machines S8 Compact S8 Escape / Escape II S8 Eli … [Read More]
-
-
-
$10.50
These filters come in matched pairs and are disposable. For best performance they should be changed regularly when soiled. (Filter pairs may be pink-and-yellow or white-and-yellow depending on the time of manufacture.) Dimensions: 6.25 Inches Long by .75 Inches Wide Compatibility: ResMed S3 (Sullivan 3) Series ResMed S5 (Sullivan 5) Series ResMed VPAP ResMed VPAP ST R … [Read More]
-
-
-
$11.50
These disposable white fiber filters are designed for use with ResMed's Sullivan 6 (S6) Series CPAP/BiLevel Machines. These filters are disposable and should be changed regularly when soiled. Dimensions: Approximately 5.75 Inches Long by .6 Inches Wide. Compatibility: ResMed S6 (Sullivan 6) Series S6 Lightweight S6 Elite … [Read More]
-
-
-
$39.00
This long life "cleanable" humidifier water chamber (with a clear tub) will last for 2-years on average with proper care and maintance. It is compatible with all H4i Heated Humidifiers as well as HumidAire 3i (H3i) Heated Humidifiers that have been upgraded using the H4i Upgrade Kit. Usage Information: Each chamber will hold 390 ml of water (when properly filled to the fill line). Chambers s … [Read More]
-
-
-
$22.50
This standard humidifier water chamber (with a frosted tub) will last for 6-months on average with proper care and maintance. It is compatible with all H4i Heated Humidifiers as well as HumidAire 3i (H3i) Heated Humidifiers that have been upgraded using the H4i Upgrade Kit. Usage Information: Each chamber will hold 390 ml of water (when properly filled to the fill line). Chambers should be f … [Read More]
-
-
-
$232.00
ResMed's H4i Integrated Heated Humidifier offers some great improvements on the older HumidAire 3i design including a larger water chamber, a larger heating plate, and a more robust design with metal reinforcements. The H4i integrates with all S8 and S8 Series II CPAP/VPAP machines including the S8 Compact, Escape/Escape II, Elite/Elite II, Vantage, AutoSet II, VPAP S, VPAP ST, VPAP Auto 25, etc. [Read More]
-
-
-
$44.00
This permanent Replacement Humidifier Tub Assembly (Water Chamber) with Updated Side Catches from ResMed is for all HumidAire 2i Heated Humidifiers (for use with AutoSet Spirit, VPAP III and S7 Systems). It features durable metal and solid plastic construction and updated high quality "over-center" catch mechanisms to ensure that the it stays securely closed during use. … [Read More]
-
-
-
$36.00
This HumidAire 3i to H4i Conversion Kit allows new H4i water chambers to be used with older HumidAire 3i heated humidifiers. WIth the Conversion Kit you get the convenience of added water capacity and the compatibility with the new Long Life H4i Chambers. Each kit includes a new flip top cover, seal, cleaning plug and standard H4i water chamber. The kit fits very quickly and easily onto any Hu … [Read More]
-
-
-
$97.50
This permanent Replacement Humidifier Water Chamber from ResMed is designed for use with all all Humidaire Heated CPAP/BiLevel Humidifiers. It features durable metal and solid plastic construction and has easy release catch levers for cleaning. … [Read More]
-
-
-
$7.00
The filter cover snaps onto the back of all S8 and S8 Series II CPAP and VPAP machines to cover the filter compartment. It will also help protect the device in the event of accidental liquid spillage. The filter and filter cover should be fitted at all times when using any ResMed S8 / S8 Series II CPAP or VPAP system. … [Read More]
-
HELP & RESOURCES
 |
||||||||||||
|
||||||||||||
 |
||||||||||||
 |
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||