CPAP Batteries & Power Cords - Viewed by Best Sellers

This Shielded 6-Foot 12V DC Power Cord can be used to plug many CPAP/BiPAP machines into the "cigarette" style outlets found in most cars, boats, trucks, and other vehicles. It is compatible with a wide range of machines from Covidien, DeVilbiss and Respironics.

The Long Life Rechargeable CPAP/BiPAP Battery Pack provides the ultimate in power, portability and convenience when combined with your CPAP/BiPAP system. Enjoy up to 24-hours of run time between charges! Take your CPAP/BiPAP on vacation, camping, on the road, or just about anywhere else! This package includes a carrying case, a standard AC Power Cord for recharging from US Wall Sockets, and a DC Cord for powering your Philips Respironics CPAP/BiPAP Machine from the battery pack or any 12V DC power socket.

The Travel CPAP/BiPAP Battery Pack is a brilliant power solution for people who need truly portable sleep therapy or a reliable backup for use during unexpected power outages. At the heart of the battery pack is a small and powerful lightweight Lithium Ion Battery like those found in many laptop computers. It weighs in at just 2-pounds! In addition each pack comes with a convenient Travel Bag, a Standard Power Cord for recharging from US Wall Sockets, and a DC Power Cord for connecting your Philips Respironics CPAP/BiPAP to the battery pack or any 12V DC power socket.

ResMed's DC-12 Converter allows you to operate S8 CPAP/BiLevel machines from 12 volt or 24 volt DC power sources like the "cigarette" style sockets found in most cars, boats and other vehicles. This is the only cord that should be used with these ResMed systems.

With the Kensington Travel Adapter, there's never a need to be at a loss for power again. This all-in-one unit is compact and portable, providing plug adapters for use in more than 150 countries worldwide including most of Europe, Africa, Australia, Asia, and the UK. Simply slide out one of the built-in plugs and plug in your CPAP or BiPAP system. Its safety release button and built-in fuse ensure safe operation for most other consumer electronic devices as well including laptops, cell phones, etc.

This DC Adapter Cable can be used, with a standard 12V DC Power Cord, to attach any CPAP/BiPAP machine directly to a 12 volt DC battery using "alligator" style clips. One end of the cable fits over the "cigarette" style plug on the end of a 12V DC Power Cord, the other end has two clips for direct connection to a battery.

This external power supply is for use with all PR System One 50 SERIES CPAP/BiPAP machines. This universal power supply is rated from 100-240 V, 50-60 Hz and can be used without a voltage converter in most countries worldwide.

These CPAP/BiPAP Power Cords are designed to work with standard US wall outlets and are approximately 6-Feet (Gray Cord) or 8-Feet (Black Cord) Long. They are compatible with CPAP/BiPAP systems from Covidien, DeVilbiss, ResMed, Fisher & Paykel, PMI Probasics, Philips Respironics, and others.

The Travel CPAP/BiLevel Battery Pack is a brilliant power solution for people who need truly portable sleep therapy or a reliable backup for use during unexpected power outages. At the heart of the battery pack is a small and powerful lightweight Lithium Ion Battery like those found in many laptop computers. It weighs in at just 2-pounds! In addition each pack comes with a convenient Travel Bag, a Standard Power Cord for recharging from US Wall Sockets, and a DC Power Cord for connecting your ResMed CPAP/BiLevel to the battery pack or any 12V DC power socket.

Harness your vehicle's battery to efficiently power your CPAP/BiPAP on the road. The TRIPP•LITE Power Inverter continuously supplies up to 150 watts of 120V AC power to a single AC outlet (US Wall Socket style) from any 12-volt battery or "cigarette" style socket like those found in most cars, boats, and other vehicles. Portable and compact, the inverter's design is among the most rugged available thanks to its lightweight metal casing.

This external power supply is for use with all M-Series CPAP/BiPAP Machines from Respironics including the M-Series REMstar Plus, M-Series REMstar Pro, M-Series REMstar Auto, M-Series BiPAP Pro, M-Series BiPAP Auto, etc. It is rated from 100-240 V, 50-60 Hz and can be used without a voltage converter in most countries worldwide.

ResMed's DC Converter allows you to operate any S9 CPAP/BiLevel Machine from a 12V or 24V DC Power Source like those found in many cars, boats, trucks and other vehicles. The total length of the cord is approximately 7.5 feet. A DC Adapter Cable, as shown, with "alligator" clips is also included for powering your S9 machine directly to an external battery.

This kit allows you to run a wide range of CPAP/BiPAP machines from either a "cigarette" style DC socket or a 12-volt battery. The kit includes two cords: the 1001956 DC Cord and the 532209 Direct Connect Cord, both from Philips Respironics.

This S9 Lightweight 30W Power Supply measures approximately 4.0 x 2.25 x 1.25 inches and weighs approximately .75lbs. It is smaller and lighter than the 90W version and should only be used to power the S9 CPAP/VPAP unit. It is not designed to power the H5i Heated Humidifier.

The Long Life Rechargeable CPAP Battery Pack provides the ultimate in power, portability and convenience when combined with your CPAP system. Enjoy up to 24-hours of run time between charges! Take your CPAP on vacation, camping, on the road, or just about anywhere else! This package includes a carrying case, a standard AC Power Cord for recharging from US Wall Sockets, and a Tripp•Lite Power Inverter for powering your Fisher & Paykel CPAP Machine from the battery pack or any 12V DC power socket.

This Shielded 6-Foot 12V DC Power Cord can be used to plug any PR SystemOne 60 SERIES CPAP/BiPAP machine into the "cigarette" style outlets found in most cars, boats, trucks, and other vehicles.

This DC Power Adapter Kit enables the operation of older Respironics BiPAP systems from 12v DC power sources. Use the "cigarette" style plug adapter to power your system from the 12V DC outlets found in most cars, boats, trucks, and other vehicles. Use the "alligator" Battery Adapter Cable to connect directly to free-standing 12 volt DC batteries.

ResMed's DC-24 Converter allows you to operate S8 VPAP BiLevel machines, that are designed for 24 volt DC power sources, from 12 volt DC power sources like the "cigarette" style sockets found in most cars, boats and other vehicles. This is the only cord that should be used with these ResMed systems.

The Long Life Rechargeable CPAP/BiLevel Battery Pack provides the ultimate in power, portability and convenience when combined with your CPAP/BiLevel system. Enjoy up to 24-hours of run time between charges! Take your CPAP/BiLevel on vacation, camping, on the road, or just about anywhere else! This package includes a carrying case, a standard AC Power Cord for recharging from US Wall Sockets, and a DC Cord for powering your ResMed CPAP/BiLevel Machine from the battery pack or any 12V DC power socket.

The Travel CPAP/BiPAP Battery Pack is a brilliant power solution for people who need truly portable sleep therapy or a reliable backup for use during unexpected power outages. At the heart of the battery pack is an ultra-small, ultra-light (just 2 pounds), ultra-powerful Lithium Ion battery like those found in many laptop computers. In addition each pack comes with a convenient Travel Bag and a Standard Power Cord for recharging from US Wall Sockets.

This S9 90W Power Supply measures approximately 6.5 x 2.5 x 1.5 inches and weighs approximately 1.25lbs. It is designed to power both the S9 CPAP/VPAP and an H5i Heated Humidifier. It can also be used to recharge ResMed Power Station II CPAP/BiLevel Batteries.

The Travel CPAP Battery Pack is a brilliant power solution for people who need truly portable sleep therapy or a reliable backup for use during unexpected power outages. At the heart of the battery pack is a small and powerful lightweight Lithium Ion Battery like those found in many laptop computers. It weighs in at just 2-pounds! In addition each pack comes with a convenient Travel Bag, a Standard Power Cord for recharging from US Wall Sockets, and a DC Power Cord for connecting your Fisher & Paykel CPAP to the battery pack or any 12V DC power socket.

This replacement lithium-ion battery is designed for use with all cpapXchange Lightweight Travel CPAP/BiPAP Battery Packs. It can be used as an extra battery to double the run time of your battery pack, or to replace an existing battery which has reached the end of its usable life.

The Long Life Rechargeable CPAP/BiPAP Battery Pack provides the ultimate in power, portability and convenience when combined with your CPAP/BiPAP system. Enjoy up to 24-hours of run time between charges! Take your CPAP/BiPAP on vacation, camping, on the road, or just about anywhere else! This package includes a carrying case, a standard AC Power Cord for recharging from US Wall Sockets, and a DC Cord for powering your DeVilbiss CPAP/BiPAP Machine from the battery pack or any 12V DC power socket.

The Long Life Rechargeable CPAP/BiPAP Battery Pack provides the ultimate in power, portability and convenience when combined with your CPAP/BiPAP system. Enjoy up to 24-hours of run time between charges! Take your CPAP/BiPAP on vacation, camping, on the road, or just about anywhere else! Each battery pack includes a carrying case and a standard AC Power Cord for recharging from US Wall Sockets.

Designed exclusively for ResMed Sleep Therapy Devices the ResMed Power Station (RPS) II is a lightweight, lithium-ion battery solution that provides extended run times in a compact, travel friendly package. The RPS II is great for airline travel and meets all FAA & IATA regulations for use on commercial airlines.

• Click Here for Compatible Parts & Accessories

This specialized DC Cable is designed exclusively to plug S9 Series CPAP/BiLevel machines into ResMed Power Station (RPS) II Battery Packs. It cannot be used to plug an S9 machine into a standard DC Power Outlet, for that DC Power cord search for part 36970.

This AC Power Cord Extender will extend the length of the standard AC power cords found on many CPAP/BiPAP machines by approximately 6-feet. It compatible with the standard AC Power Cords used on many of the CPAP/BiPAP machines from Covidien, DeVilbiss, ResMed, Fisher & Paykel, Probasics, and Philips Respironics.

The Travel CPAP/BiPAP Battery Pack is a brilliant power solution for people who need truly portable sleep therapy or a reliable backup for use during unexpected power outages. At the heart of the battery pack is a small and powerful lightweight Lithium Ion Battery like those found in many laptop computers. It weighs in at just 2-pounds! In addition each pack comes with a convenient Travel Bag, a Standard Power Cord for recharging from US Wall Sockets, and a DC Power Cord for connecting your DeVilbiss CPAP/BiPAP to the battery pack or any 12V DC power socket.

This Mobile Power Adapter with DC Cord is designed for use with all Transcend Series CPAP Machines including the Transcend (Original) Wearable CPAP and the Transcend II Travel CPAP. The DC Cord can be used to plug your Transcend CPAP into the cigarette style DC power outlets found in most cars, boats, trucks and other vehicles. It can also be used to charge Transcend Battery Systems from DC power outlets.

Whether you're on the road, in a plane, off the beaten path or at home in bed the Transcend’s CPAP battery won’t weigh you down. The Transcend P4 Overnight Battery System weighs just over half a pound, and the P8 Multi-night Battery System tips the scales at 1.1 pounds. No other CPAP battery comes close! Transcend batteries can be recharged with AC or DC power and will power your system for 1 or 2 nights at average CPAP settings.

This 12V DC Power Cord can be used to plug all IntelliPAP CPAP/BiPAP machines into the cigarette style DC outlets found in most cars, boats, trucks, and other vehicles. The cord is approximately 6-feet long and will work with the following machines: IntelliPAP Standard CPAP, IntelliPAP AutoAdjust Auto-CPAP and IntelliPAP BiLevel.

This Coupler Kit is designed exclusively for use with ResMed Power Station (RPS) II Battery Packs. It is used to connect two RPS II Batteries in series in order to double your CPAP/BiLevel run time. In addition it enables both batteries to charge automatically without the need for plugging and unplugging.

This powerful Lithium-Ion Battery, like those found in most laptop computers, weighs under 2-pounds and measures approximately 9 x 5 x 1 inches. It is designed exclusively for use with ResMed Power Station (RPS) II Battery Packs. The battery includes audible and visual alerts to indicate when it needs to be recharged. A visual battery-charge display indicates overall charge levels.

This Travel Bag is specifically designed for use with ResMed's RPS II CPAP Battery packs. The travel bag is designed to hold one or two batteries and includes a handy access panel so that batteries can be used to power your CPAP/BiLevel device, or be recharged, without ever being removed from the bag.

This PSU Adapter is designed exclusively for use with the ResMed Power Station (RPS) II. The PSU is used to connect RPS II batteries to the S9 External Power Supply (Part 36821) for recharging. The PSU is only used to recharge RPS II batteries.

This Universal Power Supply with AC Cord is designed for use with all Transcend Series CPAP Machines including the Transcend (Original) Wearable CPAP and the Transcend II Travel CPAP. A North American AC (Wall) Power Cord is included as shown. The Universal Power Supply can also be used to recharge Transcend Battery Packs.

This external power supply is for use with all PR System One 60 SERIES CPAP/BiPAP machines. This universal power supply is rated from 100-240 V, 50-60 Hz and can be used without a voltage converter in most countries worldwide.

The Transcend Portable Solar Charger recharges Transcend CPAP Batteries with the power of the sun so you can be sure to have power for your CPAP when you sleep under the stars... And after all, what could be better (and greener) than free power? The Portable Solar Charger's military grade PowerFilm Solar modules begin charging the battery immediately when placed in the sun and will charge batteries efficiently even in low light conditions.