This Silicone Seal is designed for use with all FlexiFit 407 (HC407) Nasal CPAP/BiPAP Masks. The frosted, clear silicone seal fits outside of the gray foam cushion when attached to the mask frame. … [Read More]

This replacement FlexiFoam Cushion is designed for all Aclaim 2 (HC401) and FlexiFit 405 (HC405) Nasal CPAP/BiPAP Masks. Sizing on Aclaim 2 and FlexiFit 405 is accomplished with the Silicone Seal so both masks use a single Foam Cushion size regardless of mask size. … [Read More]

This replacement Foam Cushion & Silicone Seal Pack is designed for all Aclaim 2 (HC401) and FlexiFit 405 (HC405) Nasal CPAP and BiPAP Masks. The cushion uses FlexiFit foam / air technology to conform to most noses and facial features. Aclaim2 and FlexiFit 405 masks use a single frame size so either pack size can be used regardless of the size currently being used on your mask. … [Read More]
This replacement Silicone Seal is designed for all Aclaim 2 (HC401) and FlexiFit 405 (HC405) Nasal CPAP and BiPAP Masks. The Silicone Seal is available in two sizes: Small and Large. Aclaim 2 and FlexiFit 405 masks use a single frame size so either Silicone Seal size can be used regardless of the size currently being used on your mask. … [Read More]

This is replacement Adjustable Breath-O-Prene Headgear (straps) for all Aclaim 2 (HC401) Nasal CPAP and BiPAP Masks. … [Read More]

This Diffuser Cap fits over the Foam Diffuser on the exhalation vent of all Aclaim2 Nasal CPAP and BiPAP masks to keep the filter in place. Each pack includes 2 Diffuser Caps. This pack does not include the diffusers which are sold separately. … [Read More]

This Flextube Kit with Swivel is designed for all Aclaim 2 (HC401) Nasal CPAP and BiPAP Masks. It includes the short tube and swivel that connects your standard CPAP or BiPAP tubing to the Aclaim2 mask. … [Read More]

This Foam Diffuser fits into the exhalation vent of all Aclaim2 (HC401) Nasal CPAP/BiPAP masks to reduce noise. Each pack includes 10 diffusers. This pack does not include the cap needed to hold the diffusers in place. Caps are sold separately. … [Read More]

These replacement Glider Straps are designed for use with all Aclaim 2 (HC401), FlexiFit 405 (HC405), FlexiFit 406 (HC406), FlexiFit 407 (HC407), Zest and F&P Zest Q Nasal CPAP/BiPAP masks. Each pack comes with two glider straps. … [Read More]

These replacement Forehead Pads are designed to fit all Aclaim2 (HC401), FlexiFit 405 (HC405), FlexiFit 406 (HC406), FlexiFit 407 (HC407), Zest and F&P Zest Q Nasal CPAP/BiPAP Masks; as well as the FlexiFit 431 (HC431), FlexiFit 432 (HC432), and Forma Full Face CPAP/BiPAP Masks. This is the piece that rests between mask and forehead. Each pack comes with two forehead pads. … [Read More]

This Female Swivel Connector is designed to fit all Aclaim2 (HC401), FlexiFit 405 (HC405), FlexiFit 406 (HC406), FlexiFit 407 (HC407), Zest and F&P Zest Q Nasal CPAP/BiPAP Masks; and Oracle (HC451 & HC452) Oral CPAP/BiPAP Masks. This is the part that connects the mask elbow to standard CPAP/BiPAP tubing. … [Read More]

This Diffuser Cap is for use with the Diffuser Elbow available for all FlexiFit 405 (HC405), FlexiFit 406 (HC406), and FlexiFit (HC407) Nasal CPAP/BiPAP masks, and all Oracle (HC451 & HC452) Oral CPAP/BiPAP Masks. The Diffuser Cap fits over the Foam Diffuser on the exhalation vent of the Diffuser Elbow. Each pack includes 2 Diffuser Caps. It does not include the diffusers which are sold separ … [Read More]

This Diffuser Elbow Kit with Female Swivel comes standard with all FlexiFit 405 (HC405) Nasal CPAP/BiPAP Masks and Oracle (HC451 & HC452) Oral CPAP/BiPAP Masks. It can also be used to replace the Non-Diffuser Elbow that comes standard with all FlexiFit 406 (HC406) and FlexiFit (HC407) Nasal CPAP/BiPAP masks. The Diffuser elbow features a foam diffuser and diffuser cap to help reduce airflow n … [Read More]

These Foam Diffusers are designed for use with the Diffuser Elbow available for all FlexiFit 405 (HC405), FlexiFit 406 (HC406), and FlexiFit (HC407) Nasal CPAP/BiPAP masks, and all Oracle (HC451 & HC452) Oral CPAP/BiPAP Masks. Each pack includes ten foam diffusers. … [Read More]

This Non-Diffuser Elbow Kit with Female Swivel comes standard with all FlexiFit 406 (HC406) and FlexiFit (HC407) Nasal CPAP/BiPAP masks. It can also be used to replace the Diffuser Elbow that comes standard with all FlexiFit 405 (HC405) Nasal CPAP/BiPAP Masks and Oracle (HC451 & HC452) Oral CPAP/BiPAP Masks. The Non-Diffuser elbow features small vent holes which eliminate the need for foam diffus … [Read More]

This is replacement Adjustable Breath-O-Prene Headgear (straps) for all FlexiFit 405 (HC405) Nasal CPAP/BiPAP Masks. Note that this is the headgear straps only. The complete mask with headgear is available elsewhere on this site. … [Read More]

This is replacement Mask Frame Only for all FlexiFit 405 (HC405) Nasal CPAP/BiPAP Masks. It does not include headgear, cushions, forehead pads, or elbow. … [Read More]

This replacement Foam Cushion & Silicone Seal Pack is designed for all FlexiFit 406 (HC406) Petite Nasal CPAP/BiPAP Masks. The cushion uses FlexiFit foam / air technology to conform to most noses and facial features. … [Read More]

This is replacement Adjustable Stretchgear Headgear (straps) for all FlexiFit 407 (HC407) Nasal CPAP/BiPAP Masks. Note that this is the headgear straps only. The entire mask with headgear is available elsewhere on this site. … [Read More]

This is replacement Mask Frame Only for all FlexiFit 407 (HC407) Nasal CPAP/BiPAP Masks. It does not include headgear, cushions, forehead pads or elbow. … [Read More]

This gray FlexiFoam Cushion is designed for use with all FlexiFit 407 (HC407) Nasal CPAP/BiPAP Masks. With FlexiFit Foam / Air Technology it conforms to most noses and facial features. … [Read More]

This FlexiFoam Cushion & Silicone Seal Pack is designed for use with all FlexiFit 407 (HC407) Nasal CPAP and BiPAP Masks. The gray cushion uses FlexiFit foam / air technology to conform to most noses and facial features. The frosted/clear silicone seal fits outside of the cushion. … [Read More]

This is the adjustable Easy Release Headgear (straps) with Clip & Tri-Glide Buckle that comes standard with all FlexiFit 431 (HC431) Full Face CPAP/BiPAP Masks. It is identical to the headgear used for the FlexiFit 432 except for the label, indicating the mask design, on the back of the headgear. A Tri-Glide Buckle, which connects the two headgear straps at the back of the head for easy adjustm … [Read More]

This breathable Streatchgear Headgear comes standard on all Forma CPAP/BiPAP masks. The headgear is designed to maintain a firm seal without the need for overtightening. A Tri-Glide buckle is included to join the headgear's back straps behind the head. … [Read More]

This foam cushion insert comes standard on all Forma Full Face CPAP/BiPAP Masks. The cushion rests inside the Silicone Seal which is available separately on this site. The Forma uses a single frame for all mask sizes, therefore, if you would like to change the size of your mask, you just need to purchase a different cushion and seal size. Any cushion size will work on any Forma mask. … [Read More]

This pack includes the gray FlexiFoam Cushion and clear (white) Silicone Seal used on all Forma Full Face CPAP/BiPAP Masks. The Forma uses a single frame for all sizes, therefore, if you would like to change the size of your mask, you just need to purchase a different cushion and seal size. Any cushion and seal size will work on any Forma Full Face mask. For proper fit always use the same sized c … [Read More]

These updated replacement nasal pillows are designed for use with all Opus and Opus 360 (HC482) Nasal Pillow CPAP/BiPAP Masks. Updated nasal pillows feature a new smooth contoured shape designed to keep the silicone seal "off the lip" for maximum comfort. Each pack contains one nasal pillows cushion. … [Read More]

This adjustable StretchGear Headgear comes standard on all Standard and Plus sized Zest and F&P Zest Q Nasal CPAP/BiPAP Masks. It can also be used with Petite sized Zest and F&P Zest Q Nasal CPAP/BiPAP Masks. … [Read More]

This kit includes the Elbow and Swivel for use with all Zest Nasal CPAP/BiPAP Masks. … [Read More]

These foam cushions are designed for use with all Zest and F&P Zest Q Nasal CPAP/BiPAP masks. Sizing Information: The Zest mask is available in three sizes. Choose the correct cushion size -- Petite, Standard, or Plus -- to fit your mask. The cushions are not interchangeable between sizes. … [Read More]

This package includes both the FlexiFoam Nasal cushion and Silicone Seal designed for use with all Zest and F&P Zest Q Nasal CPAP/BiPAP masks. Sizing Information: Zest masks are available in three sizes. Choose the correct size -- Petite, Standard, or Plus -- to fit your mask. The cushions and seals are not interchangeable between sizes. … [Read More]
|
||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Switch to Mobile | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
