|
 |
Aclaim2 & FlexiFit 405 Mask Parts - Foam Cushion & Silicone Seal Pack |
| This replacement Foam Cushion & Silicone Seal Pack is designed for all Aclaim 2 (HC401) and FlexiFit 405 (HC405) Nasal CPAP/BiPAP Masks. The cushion uses FlexiFit foam / air technology to conform to most noses and facial features. Aclaim2 and FlexiFit 405 masks use a single frame size so either pack size can be used regardless of the size currently being used on your mask. Fisher & Paykel - Part 900HC427-Small, 900HC428-Large |
 |
| Aclaim2 & FlexiFit 405 Cushion & Seal Pack |
1-Pack $24.99  |
 |
| Aclaim2 & FlexiFit 405 Cushion & Seal Pack |
10-Pack $150.00  |
 |
|
 |
Aclaim2 & FlexiFit 405 Mask Parts - Foam Cushion |
| This replacement Foam Cushion is designed for all Aclaim 2 (HC401) and FlexiFit 405 (HC405) Nasal CPAP/BiPAP Masks. Sizing on Aclaim2 and FlexiFit 405 is accomplished with the Silicone Seal so both masks use a single Foam Cushion size regardless of mask size. Fisher & Paykel - Part 900HC426 |
 |
| Aclaim2 & FlexiFit 405 Foam Cushion |
1-Pack $14.00  |
 |
| Aclaim2 & FlexiFit 405 Foam Cushion |
10-Pack $98.00  |
 |
|
 |
Aclaim2 & FlexiFit 405 Nasal Mask Parts - Silicone Seal |
| This replacement Silicone Seal is designed for all Aclaim 2 (HC401) and FlexiFit 405 (HC405) Nasal CPAP/BiPAP Masks. The Silicone Seal is available in two sizes: Small and Large. Aclaim2 and FlexiFit 405 masks use a single frame size so either Silicone Seal size can be used regardless of the size currently being used on your mask. Fisher & Paykel - Part 900HC436-Small, 900HC437-Large |
 |
| Aclaim2 & FlexiFit 405 Silicone Seal |
1-Pack $14.50  |
 |
| Aclaim2 & FlexiFit 405 Silicone Seal |
10-Pack $98.00  |
 |
|
 |
Aclaim2 Nasal Mask Parts - Adjustable Breath-O-Prene Headgear |
| This is replacement Adjustable Breath-O-Prene Headgear (straps) for all Aclaim 2 (HC401) Nasal CPAP/BiPAP Masks. Note that this is the headgear straps only. For the entire mask with headgear click here. Fisher & Paykel - Part 900HC403 |
 |
| Aclaim2 Adjustable Breath-O-Prene Headgear |
$22.00  |
 |
|
|
 |
Aclaim2 Mask Parts - Flextube Kit with Swivel |
| This Flextube Kit with Swivel is designed for all Aclaim2 (HC401) Nasal CPAP/BiPAP Masks. It includes the short tube and swivel that connects your standard CPAP/BiPAP tubing to the Aclaim2 mask. Fisher & Paykel - Part 900HC412 |
 |
| Aclaim2 Flextube Kit with Swivel |
$5.50  |
 |
|
|
 |
Aclaim2 Nasal Mask Parts - Foam Diffusers |
| This Foam Diffuser fits into the exhalation vent of all Aclaim 2 (HC401) Nasal CPAP/BiPAP masks to reduce noise. Each pack includes 10 diffusers. It does not include the cap needed to hold it in place which is sold below. Fisher & Paykel - Part 900HC416 |
 |
| Aclaim2 Foam Diffusers |
10-Pack $9.99  |
 |
|
|
 |
Aclaim2 Nasal Mask Parts - Diffuser Caps |
| This Diffuser Cap fits over the Foam Diffuser on the exhalation vent of all Aclaim 2 (HC401) Nasal CPAP/BiPAP masks to keep the filter in place. Each pack includes 2 Diffuser Caps. It does not include the diffusers which are sold separately above. FIsher & Paykel - Part 900HC420 |
 |
| Aclaim2 Diffuser Cap |
2-Pack $2.49  |
 |
|
|
 |
Aclaim2, FlexiFit, Forma, & Zest Series Mask Parts - Forehead Pads |
| These replacement Forehead Pad are designed to fit all Aclaim 2 (HC401) , FlexiFit 405 (HC405), FlexiFit 406 (HC406), FlexiFit 407 (HC407), and Zest (400440) Nasal CPAP/BiPAP masks; as well as the FlexiFit 431 (HC431), FlexiFit 432 (HC432) , and Forma (40047X) Full Face CPAP/BiPAP masks. This is the piece that rests between mask and patient's forehead. Each pack comes with two forehead pads. FIsher & Paykel - Part 900HC423 |
 |
| Aclaim2, FlexiFit, Forma & Zest Series Forehead Pads |
2-Pack $5.49  |
 |
|
|
 |
FlexiFit 405 Nasal Mask Parts - Mask Frame Only |
| This is replacement Mask Frame Only for all FlexiFit 405 (HC405) Nasal CPAP/BiPAP Masks. It does not include headgear, cushions, forehead pads or elbow. For the entire mask with cushions and headgear click here. Fisher & Paykel |
 |
| FlexiFit 405 Nasal Mask Frame Only |
$20.00  |
 |
|
|
 |
FlexiFit 405 Nasal Mask Parts - Adjustable Breath-O-Prene Headgear |
| This is replacement Adjustable Breath-O-Prene Headgear (straps) for all FlexiFit 405 (HC405) Nasal CPAP/BiPAP Masks. Note that this is the headgear straps only. For the entire mask with headgear click here. Fisher & Paykel - Part 900HC429 |
 |
| FlexiFit 405 Adjustable Breath-O-Prene Headgear |
$17.50  |
 |
|
|
 |
FlexiFit & Oracle Series Parts - Non-Diffuser Elbow Kit with Female Swivel |
| This Non-Diffuser Elbow Kit with Female Swivel comes standard with all FlexiFit 406 (HC406) and FlexiFit (HC407) Nasal CPAP/BiPAP masks. It can also be used to replace the Diffuser Elbow that comes standard with all FlexiFit 405 (HC405) Nasal CPAP/BiPAP Masks and Oracle (HC451 & HC452) Oral CPAP/BiPAP Masks. The Non-Diffuser elbow features small vent holes which eliminate the need for foam diffusers and the diffuser cap use in the older style Diffuser Elbow. This kit includes the Elbow (with vent holes) and Swivel. Fisher & Paykel - Part 400HC202 |
 |
| FlexiFit & Oracle Non-Diffuser Elbow Kit with Female Swivel |
$18.00  |
 |
|
|
 |
FlexiFit & Oracle Series Parts - Diffuser Elbow Kit with Female Swivel |
| This Diffuser Elbow Kit with Female Swivel comes standard with all FlexiFit 405 (HC405) Nasal CPAP/BiPAP Masks and Oracle (HC451 & HC452) Oral CPAP/BiPAP Masks. It can also be used to replace the Non-Diffuser Elbow that comes standard with all FlexiFit 406 (HC406) and FlexiFit (HC407) Nasal CPAP/BiPAP masks. The Diffuser elbow features a foam diffuser and diffuser cap to help reduce airflow noise levels during sleep. This kit includes the Elbow, Foam Diffuser, Diffuser Cap, and Swivel. Fisher & Paykel - Part 900HC441 |
 |
| FlexiFit & Oracle Diffuser Elbow Kit with Female Swivel |
$22.00  |
 |
|
|
 |
FlexiFit & Oracle Series Mask Parts - Foam Diffusers |
| These Foam Diffusers are designed for use with the Diffuser Elbow available for all FlexiFit 405 (HC405), FlexiFit 406 (HC406), and FlexiFit (HC407) Nasal CPAP/BiPAP masks; and all Oracle (HC451 & HC452) Oral CPAP/BiPAP Masks. Each pack includes ten foam diffusers. Fisher & Paykel - Part 900HC439 |
 |
| FlexiFit & Oracle Series Foam Diffusers |
10-Pack $9.99  |
 |
|
|
 |
FlexiFit & Oracle Series Mask Parts - Diffuser Caps |
| This Diffuser Cap is for use with the Diffuser Elbow available for all FlexiFit 405 (HC405), FlexiFit 406 (HC406), and FlexiFit (HC407) Nasal CPAP/BiPAP masks; and all Oracle (HC451 & HC452) Oral CPAP/BiPAP Masks. The Diffuser Cap fits over the Foam Diffuser on the exhalation vent of the Diffuser Elbow. Each pack includes 2 Diffuser Caps. It does not include the diffusers which are sold separately above. FIsher & Paykel - Part 900HC440 |
 |
| FlexiFit & Oracle Series Diffuser Caps |
2-Pack $2.49  |
 |
|
|
 |
FlexiFit 406 Petite Nasal Mask Parts - Foam Cushion & Silicone Seal Pack |
| This replacement Foam Cushion & Silicone Seal Pack is designed for all FlexiFit 406 (HC406) Petite Nasal CPAP/BiPAP Masks. The cushion uses FlexiFit foam / air technology to conform to most noses and facial features. Fisher & Paykel - Part 400HC509 |
 |
| FlexiFit 406 Foam Cushion & Silicone Seal Pack |
$29.00  |
 |
|
|
 |
FlexiFit 407 Nasal Mask Parts - Foam Cushion & Silicone Seal Pack |
| These replacement Foam Cushions & Silicone Seals are designed for all FlexiFit 407 (HC407) Nasal CPAP/BiPAP Masks. The gray cushion uses FlexiFit foam / air technology to conform to most noses and facial features. The frosted/clear silicone seal fits outside of the cushion. Fisher & Paykel - Part 400HC501 (Cushion & Seal Pack), 400HC002 (Foam Cushion), 400HC100-1 (Silicone Seal) |
 |
| FlexiFit 407 Foam Cushion & Silicone Seal Pack |
$27.00  |
 |
| FlexiFit 407 Foam Cushion |
$16.00  |
 |
| FlexiFit 407 Silicone Seal |
$14.00  |
 |
|
 |
FlexiFit 407 Nasal Mask Parts - Adjustable Stretchgear Headgear |
| This is replacement Adjustable Stretchgear Headgear (straps) for all FlexiFit 407 (HC407) Nasal CPAP/BiPAP Masks. Note that this is the headgear straps only. For the entire mask with headgear click here. Fisher & Paykel - Part 400HC301 |
 |
| FlexiFit 407 Adjustable Stretchgear Headgear |
$24.99  |
 |
|
|
 |
FlexiFit 407 Nasal Mask Parts - Mask Frame Only |
| This is replacement Mask Frame Only for all FlexiFit 407 (HC407) Nasal CPAP/BiPAP Masks. It does not include headgear, cushions, forehead pads or elbow. For the entire mask with cushions and headgear click here. Fisher & Paykel |
 |
| FlexiFit 407 Nasal Mask Frame Only |
$17.49  |
 |
|
|
 |
FlexiFit 431 & 432 Mask Parts - Easy Release Headgear with Clips |
This is the adjustable Easy Release Headgear (straps) with Clip & Tri-Glide Buckle that comes standard with all FlexiFit 431 (HC431) and FlexiFit 432 (HC432) Full Face CPAP/BiPAP Masks. The headgear designes are identical except for the label which designates use with the 431 or 432 mask.
The Tri-Glide Buckle, which connects the two headgear straps at the back of the head for easy adjustments, is included with the headgear however it can also be purchased separately below. Fisher & Paykel - Part 400HC302 (Headgear labeled for FlexiFit 431 masks), 400HC309 (Headgear labeled for FlexiFit 432 masks), 400HC312 (Tri-Glide Buckle only). |
 |
| FlexiFit 431 - Easy Release Headgear with Clip & Buckle |
$32.00  |
 |
| FlexiFit 432 - Easy Release Headgear with Clip & Buckle |
$32.00  |
 |
| FlexiFit 431 & 432 - Tri-Glide Buckle |
$4.25  |
 |
|
 |
FlexiFit 431 Full Mask Parts - Replacement Silicone Seal |
| This clear Silicone Seal is designed for use with all Forma, FlexiFit 431 (HC431) and FlexiFit 432 (HC432) Full Face CPAP/BiPAP Masks. Please note that the FlexiFit 431 uses only the Silicone Seal while the Forma and FlexiFit 432 masks use both a Foam Cushion and Silicone Seal. Fisher & Paykel - Part 400HC112-Small, 400HC104-Medium, 400HC103-Large, 400HC1XL-ExtraLarge |
 |
| FlexiFit 431, 432 & Forma Replacement Silicone Seal |
$29.00  |
 |
|
 |
FlexiFit 431, 432 & Forma Parts - Glider Strap |
| This Glider Strap is designed for use with all Flexifit 431 (HC431), FlexiFit 432 (HC432) & Forma (44047X) Full Face CPAP/BiPAP masks. This part extends across the front of the mask allowing for quick release of the headgear without headgear adjustments. Fisher & Paykel - Part 400HC219. |
 |
| FlexiFit 431, 432 & Forma Glider Strap |
$4.99  |
 |
|
|
 |
FlexiFit 432 Full Face Mask Parts - Foam Cushions & Silicone Seals |
These Foam Cushions (gray) and Silicone Seals (clear white) come standard on all FlexiFit 432 (HC432) Full Face CPAP/BiPAP Masks. The FlexiFit 432 uses a single frame for all sizes therefore, if you would like to change the size of your mask, you just need to purchase a different cushion and seal size. Any cushion and seal size will work on any FlexiFit 432 mask.
USAGE NOTES: The FlexiFit 432 mask comes standard with both a cushion and a seal however the mask can be used without the foam cushion is that is preferred. These Silicone Seals can also be used on all FlexiFit 431 (HC431) and Forma Full Face CPAP/BiPAP Masks.
Fisher & Paykel - Cushion & Seal Pack = Part 400HC113-Small, 400HC114-Medium, 400HC115-Large, 400HC119-ExtraLarge. Gray Foam Cushion = Part 400HC004-Small, 400HC005-Medium, 400HC006-Large, 400HC007-ExtraLarge. Clear Silicone Seal = Part 400HC112-Small, 400HC104-Medium, 400HC103-Large, 400HC1XL-ExtraLarge
|
 |
| FlexiFit 432 Foam Cushion & Silicone Seal Pack |
$39.00  |
 |
| FlexiFit 432 Replacement Foam Cushion |
$17.50  |
 |
| Forma, FlexiFit 431 & 432 Replacement Silicone Seal |
$29.00  |
 |
|
 |
FlexiFit 431, 432 & Forma Parts - Elbow Kit with Non-Rebreathing Valve |
| This Elbow Kit with Non-Rebreathing Valve is designed for use with all Flexifit 431 (HC431), FlexiFit 432 (HC432) & Forma (44047X) Full Face CPAP/BiPAP masks. This part connects the mask to standard CPAP/BiPAP tubing. Fisher & Paykel - Part 400HC203 |
 |
| FlexiFit 431, 432 & Forma Elbow with Non-Rebreathing Valve |
$32.00  |
 |
|
|
 |
Forma Full Face Mask Parts - Foam Cushions & Silicone Seals |
These Foam Cushions (gray) and Silicone Seals (clear white) come standard on all Forma Full Face CPAP/BiPAP Masks. The Forma uses a single frame for all sizes therefore, if you would like to change the size of your mask, you just need to purchase a different cushion and seal size. Any cushion and seal size will work on any Forma mask.
USAGE NOTES: The Forma mask comes standard with both a cushion and a seal however the mask can be used without the foam cushion is that is preferred. These Silicone Seals can also be used on all FlexiFit 431 (HC431) and FlexiFit 432 (HC432) Full Face CPAP/BiPAP Masks.
Fisher & Paykel - Cushion & Seal Pack = Part 400HC121-Small, 400HC122-Medium, 400HC123-Large, 400HC124-ExtraLarge. Gray Foam Cushion = Part 400HC011-Small, 400HC012-Medium, 400HC013-Large, 400HC014-ExtraLarge. Clear Silicone Seal = Part 400HC112-Small, 400HC104-Medium, 400HC103-Large, 400HC1XL-ExtraLarge
|
 |
| Forma Foam Cushion & Silicone Seal Pack |
$42.99  |
 |
| Forma Foam Cushion (Only) |
$19.99  |
 |
| Forma Silicone Seal (Only) |
$29.00  |
 |
|
 |
Forma Mask Parts - Easy Release Headgear with Clips |
This is the adjustable Easy Release Headgear (straps) with Clip & Tri-Glide Buckle that comes standard with all Forma Full Face CPAP/BiPAP Masks.
The Tri-Glide Buckle, which connects the two headgear straps at the back of the head for easy adjustments, is included with the headgear however it can also be purchased separately below. Fisher & Paykel - Part 400HC315 (Headgear with Clip & Buckle), 400HC312 (Tri-Glide Buckle only). |
 |
| Forma 431 - Easy Release Headgear with Clip & Buckle |
$34.99  |
 |
| Forma - Tri-Glide Buckle |
$4.25  |
 |
|
 |
Opus 360 Mask Parts - Replacement Nasal Pillows |
| These are updated replacement nasal pillows designed for use with all Opus and Opus 360 (HC482) Nasal Pillow CPAP/BiPAP Masks. Updated nasal pillows feature a new smooth contoured shape designed to keep the silicone seal "off the lip" for maximum comfort. Each pack contains one nasal pillow set. Fisher & Paykel - Part 400HC116-Small, 400HC117-Medium, 400HC118-Large |
 |
| Opus 360 Replacement Nasal Pillows |
$22.00  |
 |
|
|
 |
Opus 360 Mask Parts - Tri-Glide Buckle |
| This Tri-Glide Buckle, connects the headgear straps at the back of the head for easy adjustments.. Fisher & Paykel - Part 400HC312 (Tri-Glide Buckle only). |
 |
| Tri-Glide Buckle for Opus 360, FlexiFit 431 and FlexiFit 432 Masks |
$4.25  |
 |
|
|
|