CPAP/BiPAP Machine Parts - Viewed by Best Sellers

With filtration efficiencies over 99.99+% the Hudson 1605 Filter (complete with holders as shown) helps stop the viruses and bacteria that often plague CPAP/BiPAP users creating a clean, sterile environment for airflow. Simply attach the filter to your machine between the air outlet and standard tubing to experience a steady flow of clean, pure, good tasting air. These in-line BV Filters fit most systems including Respironics, ResMed, Covidien, DeVilbiss, Puritan Bennett, and more.

These disposable ultra fine filters are designed for use with all PR SystemOne and M-Series/BiPAP Machines. For optimal performance ultra fine filters should be changed regularly when they appear soiled or discolored. Dimensions: Approximately 1.75 (1-3/4) inches long by .875 (7/8) inch wide.

These white ultra fine fiber filters are designed for use with all (older) REMstar Series CPAP/BiPAP Machines. There is a tab on the center of each filter for easy insertion and removal from the machine. Ultra Fine filters are disposable and should be changed regularly when soiled. Dimensions: Approximately 3.5 inches long by 1.5 inches wide.

CALL 866-992-7279 FOR PRICING - Manufacturer's List Price displayed. Please call for our current price.
Compatible with nearly all CPAP, APAP, BiPAP and BiLevel systems from every manufacturer on the market Respironics' new Pure White Performance Tubing™ is 20% lighter and much more flexible than standard tubing. Its ultra-light design provides a more forgiving connection to the device so it is less likely to pull the interface and disrupt the seal!

These dark gray / black reusable foam filters are designed for use with all PR SystemOne and M-Series/BiPAP Machines. For optimal performance foam filters should be washed weekly and replaced every 2-3 months or as needed. Dimensions: Approximately 1.75 (1-3/4) inches long by .875 (7/8) inch wide.

These original two-color ResMed filters and are compatible S8, S7 and Tango Series CPAP/BiLevel machines. These Standard filters are disposable and should be changed regularly when soiled. (HypoAllergenic filters are also available.) Dimensions: Approximately 1.75 x 1.25 x .75 Inches.

The HC385 Humidifier Water Chamber is designed for use with all Fisher & Paykel 200 Series CPAP systems (HC200, HC201, HC220, HC221, etc.) as well as all SleepStyle 230, 240 and 250 series systems (HC231, HC232, HC234, HC242, HC244, HC254, etc). Each chamber has two ports -- one located on the side and one positioned on the top.

These gray foam filters are designed for use with all (older) REMstar Series CPAP/BiPAP Machines. Foam filters are reusable and should be cleaned on a regular basis and replaced as needed due to wear and tear. Dimensions: Approximately 3.5 inches long by 1.5 inches wide.

These original two-color ResMed filters and are compatible S8, S7 and Tango Series CPAP/BiLevel machines. These HypoAllergenic filters are disposable and should be changed regularly when soiled. Dimensions: Approximately 1.75 x 1.25 x .75 Inches.

These filters are designed for use with all SleepStyle 230, 240, 250 and 600 Series CPAP systems from Fisher & Paykel. SleepStyle filters are disposable; for optimal performance they should be changed regularly when they appear soiled or discolored. Dimensions: Approximately 3 inches long by 1 inch wide.

These ultra fine filters are designed for use with Fisher & Paykel's HC200 to HC221 Series CPAP Machines. Ultra fine filters are disposable; for optimal performance they should be changed regularly when they appear soiled or discolored. Dimensions: Approximately 5 inches long by .75 inches wide. There is a small notch at the end of each filter matching the filter slot within the machine.

ResMed's S9 Filters are disposable and should be changed regularly when soiled. These hypo-allergenic filters are original ResMed filters made of non-woven acrylic and polypropylene fibers with a polypropylene carrier. Dimensions: Approximately 2.125 Inches by 1.4375 Inches.

These humidifier water chambers are designed to work with all M-Series Heated & Cool Passover Humidifiers. Two chamber designs are available for MSeries Humidifiers: the R2B (Part 1003757) with side-by-side openings and the R3B (Part 1003758) with staggered openings.

This Shielded 6-Foot 12V DC Power Cord can be used to plug many CPAP/BiPAP machines into the "cigarette" style outlets found in most cars, boats, trucks, and other vehicles. It is compatible with a wide range of machines from Covidien, DeVilbiss and Respironics.

These white ultra fine filters are designed for use with all IntelliPAP CPAP/BiPAP machines. Ultra fine filters are disposable; for optimal performance they should be changed regularly when they appear soiled or discolored.

These ultra fine filters are designed for use with all GoodKnight 420 Series CPAP Machines and GoodKnight 425 Series BiPAP Machines. Ultra fine filters are disposable; for optimal performance they should be changed regularly when they appear soiled or discolored. Dimensions: Approximately 1.75 inches long by .75 inches wide.

This long life "cleanable" humidifier water chamber (with a clear tub) will last for 2-years on average with proper care and maintance. It is compatible with all H4i Heated Humidifiers as well as HumidAire 3i (H3i) Heated Humidifiers that have been upgraded using the H4i Upgrade Kit. Each chamber will hold 390 ml of water (when properly filled to the fill line).

The HC300 Long Life Humidifier Water Chamber is designed for use with all Fisher & Paykel HC100, HC105, and HC150 Series Humidifiers. The HC300 Extended Life Water Chamber is made of sturdier materials than the standard HC325 chamber and includes a stainless steel base which can be removed for easy cleaning. The HC300 is dishwasher safe and should last for several years with careful maintenance.

These foam pollen filters are designed for use with all GoodKnight 420 Series CPAP Machines and GoodKnight 425 Series BiPAP Machines. These filters are reusable; they should be cleaned on a regular basis and replaced when worn or damaged. Dimensions: Approximately 1.75 inches long by .75 inches wide.

ResMed's S9 CPAP/BiLevel Machine Filters are disposable and should be changed regularly when soiled. These filters are original ResMed filters made from Polyester fibers. Approximately 2.125 Inches by 1.4375 Inches.

This Tubing Elbow Adapter allows you to connect a standard breathing tube to most CPAP/BiPAP machines at an angle to the machine so there is less stress on the tubing connection and the pathway from machine to bed is more convenient. It is compatible with most machines from Philips Respironics, ResMed, Fisher & Paykel, Puritan Bennett, Covidien, and DeVilbiss Healthcare.

The HC355 Extended Life Humidifier Water Chamber is designed for use with all Fisher & Paykel 200 Series CPAP systems (HC200, HC201, HC220, HC221, etc.) as well as all SleepStyle 230, 240 and 250 series systems (HC231, HC232, HC234, HC242, HC244, HC254, etc). Each chamber has two ports -- one located on the side and one positioned on the top.

This humidifier chamber is designed for use with all PR System One CPAP/BiPAP Integrated Heated Humidifiers. The water chamber can be disassembled for easy cleaning and is dishwasher safe. It has a recommended maximum water capacity of 1-1/3 cups (325 ml).

This special CPAP/BiLevel tubing is manufactured by Puritan Bennett specifically for use on CPAP and BiLevel systems, such as those listed below, that require an internal pressure line. Compatibility: This tubing will fit the following machines: GoodKnight 418A, 420E, 420S, GoodKnight BiPAP 425 and KnightStar 330 Systems.

These gray foam filters are designed for use with all IntelliPAP CPAP/BiPAP machines. These filters are reusable; they should be cleaned on a regular basis and replaced when worn or damaged.

This Whisper Cap snaps on to the existing Air Intake Port on the back of all M-Series CPAP and BiPAP systems. In tests the Whisper Cap reduced overall sound levels by 3dB, on average. Sound measured 18.2dB at 5cm and 25.3dB at 10cm pressure levels.

This standard humidifier water chamber (with a frosted tub) will last for 6-months on average with proper care and maintance. It is compatible with all H4i Heated Humidifiers as well as HumidAire 3i (H3i) Heated Humidifiers that have been upgraded using the H4i Upgrade Kit. Each chamber will hold 390 ml of water (when properly filled to the fill line).

This long life "cleanable" humidifier chamber will last for 2-years on average. This chamber is dishwasher safe and is easy to disassemble and reassemble for thorough cleaning. The base of the long life chamber is made of stainless steel to make it more long lasting. These chambers are compatible with all H5i Heated Humidifiers. Each chamber will hold 380 ml of water.

This Swivel Adapter provides a 360-degree swivel connection between any two CPAP hoses or tubes. The 360-degree swivel provides extra freedom of movement for your setup and prevents kinking or pulling.

This is a replacement base plate with gasket for use with all REMstar and H2 Series CPAP/BiPAP Humidifier Chambers. The plastic chamber itself is not included.

These ultra fine filters are designed for use with all Fisher & Paykel ICON Series CPAP Machines. Each filter is approximately 2.125 inches long. The filter shape is not quite rectangular with one end measuring approximately .75 inches and the other measuring approximately .5 inches.

The HC365 Humidifier Water Chamber is designed for use with all SleepStyle 600 Series CPAP systems (HC604, HC608, etc.). Each chamber has two ports located on the back edge. The HC365 will generally last 3-6 months prior to needing to be replaced. Maximum Capacity: 19.8 fluid ounces (600 ml) to fill line.

This Respironics Filter Cover/Silencer Cap snaps into place on the back of (Older) REMstar Series CPAP Machines with C-Flex. It is compatible with C-Flex systems including the REMstar Lite, REMstar Plus, REMstar Pro/Pro2, and REMstar Auto. It will not work with M-Series or PR System One machines.

The Outlet Port Cover is used to cover the hole present on the back of M-Series CPAP/BiPAP systems when there is no humidifier attached to the unit. It covers the area where the tubing and airflow leave the machine so that tubing can be attached.

f you use an H5i Heated Humidifier with your S9 Series CPAP/BiLevel machine then you can select ClimateLine heated tubing for truly exceptional comfort. The ClimateLine tube features a temperature sensor at the mask end of the tube. You set your preferred humidity and optimum temperature levels and the S9 Climate Control system adjusts your therapy to suit.

This permanent Replacement Humidifier Tub Assembly (Water Chamber) with Updated Side Catches from ResMed is for all HumidAire 2i Heated Humidifiers (for use with AutoSet Spirit, VPAP III and S7 Systems). It features durable metal and solid plastic construction and updated high quality "over-center" catch mechanisms to ensure that the it stays securely closed during use.

This is the Flip-Top Lid (Cover) with Seal that closes and covers the removable humidifier chamber used on all H4i Humidifiers as well has HumidAire 3i Heated Humidifiers that have been upgraded using the H4i Upgrade Kit.

The Long Life Rechargeable CPAP/BiPAP Battery Pack provides the ultimate in power, portability and convenience when combined with your CPAP/BiPAP system. Enjoy up to 24-hours of run time between charges! Take your CPAP/BiPAP on vacation, camping, on the road, or just about anywhere else! This package includes a carrying case, a standard AC Power Cord for recharging from US Wall Sockets, and a DC Cord for powering your Philips Respironics CPAP/BiPAP Machine from the battery pack or any 12V DC power socket.

Track your sleep data and understand your therapy like never before with Encore Pro SmartCards and EncoreViewer software. This card is for use with all Respironics SmartCard enabled machines such as the M-Series REMstar Plus, M-Series REMstar Pro, M-Series REMstar Auto, M-Series BiPAP Auto, REMstar Auto, REMstar Pro, REMstar Pro2, BiPAP Pro, BiPAP Synchrony, etc.

The Travel CPAP/BiPAP Battery Pack is a brilliant power solution for people who need truly portable sleep therapy or a reliable backup for use during unexpected power outages. At the heart of the battery pack is a small and powerful lightweight Lithium Ion Battery like those found in many laptop computers. It weighs in at just 2-pounds! In addition each pack comes with a convenient Travel Bag, a Standard Power Cord for recharging from US Wall Sockets, and a DC Power Cord for connecting your Philips Respironics CPAP/BiPAP to the battery pack or any 12V DC power socket.

Designed exclusively for use with S9 CPAP/BiLevel machines, ResMed's SlimLine tubing is the lightest, slimmest and most flexible CPAP/BiLevel tube on the market. 40% lighter than traditional tubing, SlimLine tubing eliminates drag on your mask and weight on your bed helping to improve overall mask fit and sleep comfort.

These ultra fine filters are designed for use with all Sandman Series CPAP/BiPAP machines. Ultra fine filters are disposable; for optimal performance they should be changed regularly when they appear soiled or discolored. Dimensions: Approximately 1.125 inches wide by 1.625 inches long.

ResMed's DC-12 Converter allows you to operate S8 CPAP/BiLevel machines from 12 volt or 24 volt DC power sources like the "cigarette" style sockets found in most cars, boats and other vehicles. This is the only cord that should be used with these ResMed systems.

These gray foam filters are designed for use with all Sandman Series CPAP/BiPAP machines. These filters are reusable; they should be cleaned on a regular basis and replaced when worn or damaged. Dimensions: Approximately 1.125 inches wide by 1.625 inches long.

This Kit includes two flapper valves, one funnel and one vent cover. It is designed for use with all REMstar and H2 Series CPAP/BiPAP Humidifier Chambers.

The HC360 Extended Life Humidifier Water Chamber is designed for use with all SleepStyle 600 Series CPAP systems (HC604, HC608, etc.). Each chamber has two ports located on the back edge. The HC360 is made of sturdier materials than the standard HC365 chamber and includes a stainless steel base which can be removed for easy cleaning.

This custom hose / tubing cover is designed exclusively for use with ResMed's SlimLine and ClimateLine tubing. The Tubing Wrap will help insulate the hose from cooler outside air. In addition it improves the overall feel and look of the CPAP/BiLevel tubing on the bed. This Tubing Wrap is made of gray insulated nylon material and includes a zipper along the length of the wrap making it easy to attach and remove.

This SD Data Card is compatible with a wide range of CPAP & BiPAP machines that use SD Data Cards including Philips Respironics's System One Series machines, ResMed's S9 Series machines, and DeVilbiss Healthcare's IntelliPAP Series machines.

This silicone seal / gasket is used with H4i Long Life Humidifier Chambers to seal the top of the chamber (tub) to the bottom chamber plate, thus preventing water leakage. It should be inserted into the groove on the water chamber whenever the chamber is in use.

The Hybernite Rainout Control System enhances sleep therapy comfort by preventing condensation and rainout. Hybernite's Heated Tubing doesn't require the latest-and-greatest machine to work; it is a standalone solution that can be used with any humidified CPAP/BiPAP machine that accepts standard tubing.

Compatible with nearly all CPAP, APAP, BiPAP and BiLevel systems from every manufacturer UltraLite Max Tubing is 35% lighter and more flexible than standard tubing. Its ultra-light design provides a more forgiving connection to the device so it is less likely to pull the interface and disrupt the seal!

This valve that helps prevent the back flow of oxygen (O2) or water from the patient circuit into CPAP/BiPAP systems when the machine is turned off. It helps protect the system from water back flow -- from the breathing tube or an external humidifier -- which can cause permanent damage to the machine and oxygen back flow which can be a fire hazard.

This external power supply is for use with all PR System One 50 SERIES CPAP/BiPAP machines. This universal power supply is rated from 100-240 V, 50-60 Hz and can be used without a voltage converter in most countries worldwide.

This stylish two tone travel bag is designed to carry the PR System One CPAP/BiPAP as well as the integrated heated humidifier, power supply and cords, tubing and CPAP/BiPAP mask. It includes an adjustable shoulder strap for easy lifting.

The filter cover snaps onto the back of all S8 and S8 Series II CPAP and VPAP machines to cover the filter compartment. It will also help protect the device in the event of accidental liquid spillage. The filter and filter cover should be fitted at all times when using any ResMed S8 / S8 Series II CPAP or VPAP system.

This Heat Moisture Exchanger (HME) is designed for use with all Transcend CPAP Humidification Systems including those used with the Transcend (Original) Wearable CPAP Machine and the Transcend II Travel CPAP Machine. Heat Moisture Exchangers are reusable and should be changed as needed, on average once per week with regular use, when humidification levels appear to drop.

These foam filters are designed for use with several of Puritan Bennett's 418 Series CPAP Machines. These filters are reusable; they should be cleaned on a regular basis and replaced when worn or damaged. Dimensions: Approximately 5.25 inches long by .75 inches wide.

The Travel CPAP/BiLevel Battery Pack is a brilliant power solution for people who need truly portable sleep therapy or a reliable backup for use during unexpected power outages. At the heart of the battery pack is a small and powerful lightweight Lithium Ion Battery like those found in many laptop computers. It weighs in at just 2-pounds! In addition each pack comes with a convenient Travel Bag, a Standard Power Cord for recharging from US Wall Sockets, and a DC Power Cord for connecting your ResMed CPAP/BiLevel to the battery pack or any 12V DC power socket.

Harness your vehicle's battery to efficiently power your CPAP/BiPAP on the road. The TRIPP•LITE Power Inverter continuously supplies up to 150 watts of 120V AC power to a single AC outlet (US Wall Socket style) from any 12-volt battery or "cigarette" style socket like those found in most cars, boats, and other vehicles. Portable and compact, the inverter's design is among the most rugged available thanks to its lightweight metal casing.

Respironics exclusive EncoreViewer CPAP/BiPAP Sleep Therapy Software has been developed with patients in mind. It is user friendly and powerful, analyzing data recorded by Respironics CPAP/BiPAP machines and generates graphic reports. EncoreViewer is compatible with most Philips Respironics machines equipped with an Encore SmartCard or SD DataCard.

ResMed's H4i Integrated Heated Humidifier offers some great improvements on the older HumidAire 3i design including a larger water chamber, a larger heating plate, and a more robust design with metal reinforcements. The H4i integrates with all S8 and S8 Series II CPAP/VPAP machines including the S8 Compact, Escape/Escape II, Elite/Elite II, Vantage, AutoSet II, VPAP S, VPAP ST, VPAP Auto 25, etc.

• Click Here for Compatible Parts & Accessories

This external power supply is for use with all M-Series CPAP/BiPAP Machines from Respironics including the M-Series REMstar Plus, M-Series REMstar Pro, M-Series REMstar Auto, M-Series BiPAP Pro, M-Series BiPAP Auto, etc. It is rated from 100-240 V, 50-60 Hz and can be used without a voltage converter in most countries worldwide.

ResMed's DC Converter allows you to operate any S9 CPAP/BiLevel Machine from a 12V or 24V DC Power Source like those found in many cars, boats, trucks and other vehicles. The total length of the cord is approximately 7.5 feet. A DC Adapter Cable, as shown, with "alligator" clips is also included for powering your S9 machine directly to an external battery.

CALL 866-992-7279 FOR PRICING - Manufacturer's List Price displayed. Please call for our current price.
Designed exclusively for Philips Respironics SystemOne CPAP/BiPAP machines this Slim 15-MM White Performance Tubing is 20% lighter and much more flexible than standard tubing. Its ultra-light design provides a more forgiving connection to the device so it is less likely to pull the interface and disrupt the seal!

This kit allows you to run a wide range of CPAP/BiPAP machines from either a "cigarette" style DC socket or a 12-volt battery. The kit includes two cords: the 1001956 DC Cord and the 532209 Direct Connect Cord, both from Philips Respironics.

This Filter Cover snaps onto the back of all S9 CPAP/BiLevel Machines to cover the filter compartment. It will also help protect the device in the event of accidental liquid spillage. The filter and filter cover should be fitted at all times when using any ResMed S9 Machine.

This dishwasher safe humidifier chamber is constructed of strong Lexan (polycarbonate resin thermoplastic) and has a stainless steel heat transfer plate. The chamber is easy to remove and replace and it includes built-in overfill protection which prevents humidifier water from damaging the CPAP! Along with the unique baffle design, the water chamber allows the airflow to collect more humidity.

These ultra fine filters are designed for use with several of Puritan Bennett's 418 Series CPAP Machines. Ultra fine filters are disposable; for optimal performance they should be changed regularly when they appear soiled or discolored. Dimensions: Approximately 5.25 inches long by .75 inches wide.

This S9 Lightweight 30W Power Supply measures approximately 4.0 x 2.25 x 1.25 inches and weighs approximately .75lbs. It is smaller and lighter than the 90W version and should only be used to power the S9 CPAP/VPAP unit. It is not designed to power the H5i Heated Humidifier.

This Respironics Filter Cover/Silencer Cap snaps into place on the back of REMstar Systems without C-Flex. It is compatible with REMstar Plus or REMstar Pro system without C-Flex. It will not work with M-Series or PR System One machines.

This updated H5i Humidifier Water Chamber features a removable top for easy cleaning. With care and regular cleaning it will last for 6-months on average. These chambers are compatible with all H5i Heated Humidifiers. Each chamber will hold 380 ml of water (when properly filled to the fill line).

The Long Life Rechargeable CPAP Battery Pack provides the ultimate in power, portability and convenience when combined with your CPAP system. Enjoy up to 24-hours of run time between charges! Take your CPAP on vacation, camping, on the road, or just about anywhere else! This package includes a carrying case, a standard AC Power Cord for recharging from US Wall Sockets, and a Tripp•Lite Power Inverter for powering your Fisher & Paykel CPAP Machine from the battery pack or any 12V DC power socket.

This ThermoSmart Heated CPAP Tubing is designed exclusively for use with Fisher & Paykel's ICON Series CPAP Machines. ThermoSmart Tubing features an internal heated coil that eliminates rainout in the hose and delivers optimal temperature and humidity levels to the user regardless of outside air temperature or conditions.

This Shielded 6-Foot 12V DC Power Cord can be used to plug any PR SystemOne 60 SERIES CPAP/BiPAP machine into the "cigarette" style outlets found in most cars, boats, trucks, and other vehicles.

This Air Inlet Filter is designed for use with all Transcend Series CPAP Machines including the Transcend (Original) Wearable CPAP and the Transcend II Travel CPAP. The Air Inlet Filter comes pre-attached to the plastic base and should be used as provided.

This humidifier water chamber is compatible with all Fisher & Paykel ICON Series CPAP Machines including the ICON Novo, ICON Premo and ICON Auto. Capacity Information: 420ml to Fill Line.

The sleek "laptop style" S9 travel bag comes complete with carry handle and shoulder strap for ease of use. Inside the bag is surprisingly spacious with individual compartments for the S9, the H5i Humidifier, and accessories (such as tubing, power supply and mask).

If you use an H5i Heated Humidifier with your S9 Series CPAP/BiLevel Machine then you can select ClimateLine MAX heated tubing for truly exceptional comfort. ClimateLine MAX tubing is slightly wider than standard ClimateLine tubing so that it can support the higher pressure levels often used by BiLevel/VPAP therapy users.

This replacement tubing is designed for use with the Hybernite Rainout Control System. It is compatible with all humidified CPAP/BiPAP machines that use standard CPAP/BiPAP tubing.

This DC Power Adapter Kit enables the operation of older Respironics BiPAP systems from 12v DC power sources. Use the "cigarette" style plug adapter to power your system from the 12V DC outlets found in most cars, boats, trucks, and other vehicles. Use the "alligator" Battery Adapter Cable to connect directly to free-standing 12 volt DC batteries.

ResMed's DC-24 Converter allows you to operate S8 VPAP BiLevel machines, that are designed for 24 volt DC power sources, from 12 volt DC power sources like the "cigarette" style sockets found in most cars, boats and other vehicles. This is the only cord that should be used with these ResMed systems.

The Long Life Rechargeable CPAP/BiLevel Battery Pack provides the ultimate in power, portability and convenience when combined with your CPAP/BiLevel system. Enjoy up to 24-hours of run time between charges! Take your CPAP/BiLevel on vacation, camping, on the road, or just about anywhere else! This package includes a carrying case, a standard AC Power Cord for recharging from US Wall Sockets, and a DC Cord for powering your ResMed CPAP/BiLevel Machine from the battery pack or any 12V DC power socket.

The Travel CPAP/BiPAP Battery Pack is a brilliant power solution for people who need truly portable sleep therapy or a reliable backup for use during unexpected power outages. At the heart of the battery pack is an ultra-small, ultra-light (just 2 pounds), ultra-powerful Lithium Ion battery like those found in many laptop computers. In addition each pack comes with a convenient Travel Bag and a Standard Power Cord for recharging from US Wall Sockets.

This S9 90W Power Supply measures approximately 6.5 x 2.5 x 1.5 inches and weighs approximately 1.25lbs. It is designed to power both the S9 CPAP/VPAP and an H5i Heated Humidifier. It can also be used to recharge ResMed Power Station II CPAP/BiLevel Batteries.

The Travel CPAP Battery Pack is a brilliant power solution for people who need truly portable sleep therapy or a reliable backup for use during unexpected power outages. At the heart of the battery pack is a small and powerful lightweight Lithium Ion Battery like those found in many laptop computers. It weighs in at just 2-pounds! In addition each pack comes with a convenient Travel Bag, a Standard Power Cord for recharging from US Wall Sockets, and a DC Power Cord for connecting your Fisher & Paykel CPAP to the battery pack or any 12V DC power socket.

These ultra fine filters (which may come in yellow or blue) are designed for use with all Puresom, Zzz-PAP, and ComfortPAP machines. Ultra fine filters are disposable, for optimal performance they should be changed regularly when they appear soiled or discolored.

This replacement lithium-ion battery is designed for use with all cpapXchange Lightweight Travel CPAP/BiPAP Battery Packs. It can be used as an extra battery to double the run time of your battery pack, or to replace an existing battery which has reached the end of its usable life.

ioGear's SD Data Card Reader is simple, durable, compact and convenient. It is compatible with the SD Data Cards found in ResMed's S9 Series machines, Philips Respironics's PR System One Series machines, and DeVilbiss Healthcare's IntelliPAP Series machines.

This silicone gasket fits between the Flip Lid and the Water Chamber on all H5i Heated Humidifiers to create a seal. The Flip Lid seal should be cleaned monthly and replaced whenever it appears cracked or torn.

CALL 866-992-7279 FOR PRICING - Manufacturer's List Price displayed. Please call for our current price.
This slim 15-MM Heated Tubing is designed exclusively for Philips Respironics SystemOne "60 Series" CPAP/BiPAP machines. System One Heated Tubing delivers your precise, preferred level of humidity, regardless of outside temperatures and humidity levels, while also protecting against rainout.

For added comfort and improved therapy use the IntelliPAP Heated Humidifier with your IntelliPAP Series CPAP/APAP system. The IntelliPAP Heated Humidifier docks into the bottom of the IntelliPAP CPAP without requiring a separate hose or power cord. Its sleek design creates a single unit with the CPAP that is built for durability.

• Click Here for Compatible Parts & Accessories

The Long Life Rechargeable CPAP/BiPAP Battery Pack provides the ultimate in power, portability and convenience when combined with your CPAP/BiPAP system. Enjoy up to 24-hours of run time between charges! Take your CPAP/BiPAP on vacation, camping, on the road, or just about anywhere else! This package includes a carrying case, a standard AC Power Cord for recharging from US Wall Sockets, and a DC Cord for powering your DeVilbiss CPAP/BiPAP Machine from the battery pack or any 12V DC power socket.

The Long Life Rechargeable CPAP/BiPAP Battery Pack provides the ultimate in power, portability and convenience when combined with your CPAP/BiPAP system. Enjoy up to 24-hours of run time between charges! Take your CPAP/BiPAP on vacation, camping, on the road, or just about anywhere else! Each battery pack includes a carrying case and a standard AC Power Cord for recharging from US Wall Sockets.

Designed exclusively for ResMed Sleep Therapy Devices the ResMed Power Station (RPS) II is a lightweight, lithium-ion battery solution that provides extended run times in a compact, travel friendly package. The RPS II is great for airline travel and meets all FAA & IATA regulations for use on commercial airlines.

• Click Here for Compatible Parts & Accessories

This replacement water chamber is designed for use with all Zzz-PAP, Puresom, and ComfortPAP Heated Humidifiers. The chamber is dishwasher safe and disassembles for easy cleaning.

These black foam filters are designed for use with all Puresom, Zzz-PAP, and ComfortPAP machines. They are reusable and should be cleaned on a regular basis and replaced when worn or damaged.

The Transcend H6B Waterless Humidification Kit provides HME humidification using a special 6-foot air delivery hose that measures CPAP pressure at the mask, downstream of the HME filter, to provide constant and consistent therapy pressure all through the night. With the H6B Humidification System you can place your CPAP on a bedside table, on the floor next to the bed, or wherever it's convenient for you.

• Click Here for Compatible Parts & Accessories

This specialized DC Cable is designed exclusively to plug S9 Series CPAP/BiLevel machines into ResMed Power Station (RPS) II Battery Packs. It cannot be used to plug an S9 machine into a standard DC Power Outlet, for that DC Power cord search for part 36970.

The Travel CPAP/BiPAP Battery Pack is a brilliant power solution for people who need truly portable sleep therapy or a reliable backup for use during unexpected power outages. At the heart of the battery pack is a small and powerful lightweight Lithium Ion Battery like those found in many laptop computers. It weighs in at just 2-pounds! In addition each pack comes with a convenient Travel Bag, a Standard Power Cord for recharging from US Wall Sockets, and a DC Power Cord for connecting your DeVilbiss CPAP/BiPAP to the battery pack or any 12V DC power socket.

This Mobile Power Adapter with DC Cord is designed for use with all Transcend Series CPAP Machines including the Transcend (Original) Wearable CPAP and the Transcend II Travel CPAP. The DC Cord can be used to plug your Transcend CPAP into the cigarette style DC power outlets found in most cars, boats, trucks and other vehicles. It can also be used to charge Transcend Battery Systems from DC power outlets.

Whether you're on the road, in a plane, off the beaten path or at home in bed the Transcend’s CPAP battery won’t weigh you down. The Transcend P4 Overnight Battery System weighs just over half a pound, and the P8 Multi-night Battery System tips the scales at 1.1 pounds. No other CPAP battery comes close! Transcend batteries can be recharged with AC or DC power and will power your system for 1 or 2 nights at average CPAP settings.

This Coupler Kit is designed exclusively for use with ResMed Power Station (RPS) II Battery Packs. It is used to connect two RPS II Batteries in series in order to double your CPAP/BiLevel run time. In addition it enables both batteries to charge automatically without the need for plugging and unplugging.

Fisher & Paykel's SmartStick Studio Software is compatible with all ICON Novo, ICON Premo and ICON Auto CPAP Machines. With SmartStick Studio Software you can upload songs to your ICON and have it wake you up each morning with your favorite music!

This plastic lid is the top cover for ResMed's H5i Heated Humidifiers. It does not include the clear silicone seal (Part 36892) that sits between the chamber and the lid. That item can be purchased separately on this site.

This docking station can be used with all Transcend Series CPAP Machines including the Transcend (Original) Wearable CPAP and the Transcend II Travel CPAP. The docking station is an optional accessory. It is not required when using the Transcend however it can be used to add extra stability when resting the CPAP unit on a bedstand or side table.

This Base Pad is designed for use with all Transcend Series CPAP Machines including the Transcend (Original) Wearable CPAP and the Transcend II Travel CPAP. The base pad is a soft support cushion that attaches to the Air Inlet Filter on the bottom of the Transcend CPAP unit.

This lightweight, flexible tubing is designed for use with Transcend Series CPAP Machines when using the H6B Bedside Kit for Waterless Humidification. The tubing includes an internal pressure sensor to ensure proper pressure is delivered when in use.

The Universal Hose Tubing Adapter allows you to use standard CPAP Hoses, and any CPAP mask, with your Transcend CPAP unit. The Universal Hose Tubing Adapter is designed for use with all Transcend II Travel CPAP Machines.

The Transcend H9M On-Head Waterless Humidification Kit provides HME humidification using a special 9-inch air delivery hose that measures CPAP pressure at the mask, downstream of the HME filter, to provide constant and consistent therapy pressure all through the night. The Transcend II with H9M Humidification System is the smallest and most compact humidified CPAP option on the market. It is great for home, travel and sleeping anywhere on the go.

• Click Here for Compatible Parts & Accessories

These round silicone gaskets are designed for use with all Zzz-PAP, ComfortPAP, and PureSom CPAP machines and humidifiers. The gasket fits between the CPAP and the Humidifier chamber to create a proper seal.

If you have purchased a Philips Respironics SystemOne 60 SERIES CPAP/BiPAP Machine with a Heated Humidifier (but without heated tubing) and would like to add heated tubing to your unit then this Conversion Kit will enable you to do so. After your machine has been upgraded with the Heated Tubing Conversion Kit the Heated Humidifier will be able to deliver more consistent and higher levels of humidity, with less rainout, than machines with non-heated tubing.

F&P InfoSmart is designed to work hand in hand with Fisher & Paykel's ICON CPAP machines to track therapy progress and proactively monitor therapy compliance. InfoSmart Software produces comprehensive charting and reporting of therapy data including: 30-Days of summary data, 7-days of detailed data, and a cumulative summary of data from first use.

This powerful Lithium-Ion Battery, like those found in most laptop computers, weighs under 2-pounds and measures approximately 9 x 5 x 1 inches. It is designed exclusively for use with ResMed Power Station (RPS) II Battery Packs. The battery includes audible and visual alerts to indicate when it needs to be recharged. A visual battery-charge display indicates overall charge levels.

This Travel Bag is specifically designed for use with ResMed's RPS II CPAP Battery packs. The travel bag is designed to hold one or two batteries and includes a handy access panel so that batteries can be used to power your CPAP/BiLevel device, or be recharged, without ever being removed from the bag.

This PSU Adapter is designed exclusively for use with the ResMed Power Station (RPS) II. The PSU is used to connect RPS II batteries to the S9 External Power Supply (Part 36821) for recharging. The PSU is only used to recharge RPS II batteries.

These Nasal Cushion Adapter Rings are designed for use with all Transcend (Original) Wearable CPAP Machines as well as Transcend II Travel CPAP Machines that are equipped with an HME Waterless Humidification System. The proprietary adapter ring, working in conjunction with the Nasal Mask Shell, enables the Transcend CPAP to be used with the most popular nasal mask cushions (seals) on the market.

This Fisher & Paykel USB SmartStick compatible with all ICON Series CPAP Machines including the ICON Novo, ICON Premo and ICON Auto CPAP. The USB SmartStick will record up to 365 days of therapy data, and 30 days of detailed efficacy data and cumulative data from the machine's first use. Data will vary depending on your ICON CPAP Machine's therapy tracking capabilities.

This Universal Power Supply with AC Cord is designed for use with all Transcend Series CPAP Machines including the Transcend (Original) Wearable CPAP and the Transcend II Travel CPAP. A North American AC (Wall) Power Cord is included as shown. The Universal Power Supply can also be used to recharge Transcend Battery Packs.

This lightweight, flexible tubing is designed for use with Transcend Series CPAP Machines when using the H9M On-Head Waterless Humidification Kit. The tubing includes an internal pressure sensor to ensure proper pressure is delivered when in use. Usage Information: This tubing can ONLY be used with the Transcend H9M Waterless Humidification System and related mask adapters.

This external power supply is for use with all PR System One 60 SERIES CPAP/BiPAP machines. This universal power supply is rated from 100-240 V, 50-60 Hz and can be used without a voltage converter in most countries worldwide.

The Transcend Portable Solar Charger recharges Transcend CPAP Batteries with the power of the sun so you can be sure to have power for your CPAP when you sleep under the stars... And after all, what could be better (and greener) than free power? The Portable Solar Charger's military grade PowerFilm Solar modules begin charging the battery immediately when placed in the sun and will charge batteries efficiently even in low light conditions.