This kit allows you to run a wide range of CPAP/BiPAP machines from either a "cigarette" style DC socket or a 12-volt battery. The kit includes two cords: the 1001956 DC Cord and the 532209 Direct Connect Cord, both from Philips Respironics. The 1001956 Cord can be used to plug many CPAP/BiPAP systems into the "cigarette" style outlets found in most cars, boats, trucks, and [read more]
This DC Power Adapter Kit enables the operation of older Respironics BiPAP systems from 12v DC power sources. Use the "cigarette" style plug adapter to power your system from the 12V DC outlets found in most cars, boats, trucks, and other vehicles. Use the "alligator" Battery Adapter Cable to connect directly to free-standing 12 volt DC batteries. Literature: DC Power Ad [read more]
This Shielded 6-Foot 12V DC Power Cord can be used to plug many CPAP/BiPAP systems into the "cigarette" style outlets found in most cars, boats, trucks, and other vehicles. It is compatible with a wide range of machines from Covidien, DeVilbiss and Respironics. Literature: Respironics Shielded 12V DC Cord User Guide (PDF) Compatibility Information: COVIDIEN / PURITAN BE [read more]
This AC Power Cord Extender can be used to extend the length of an AC power cord. It is compatible with systems from Covidien, DeVilbiss, ResMed, Fisher & Paykel, and Philips Respironics. Compatibility Information: COVIDIEN / PURITAN BENNETT - Compatible with all Sandman Systems including the Sandman Intro, Sandman Info, Sandman Auto, Sandman Duo, and Sandman Duo ST. Also compatibl [read more]
This AC Power Cord has a three-prong female socket for use with many older Respironics CPAP and BiPAP machines including the REMstar Choice, Solo LX, Solo LX Plus, Aria (serial numbers => 119118), Virtuoso (serial numbers => 612283), BiPAP Duet, BiPAP Duet LX, BiPAP Pro, REMstar LX, Synchrony, Tranquility Quest, Tranquility Quest Plus, Tranquility Bilevel, Tranquility Auto, etc. The wall pl [read more]
These Power Cords are designed to work with standard US wall outlets and are approximately 6-Feet (Gray Cord) or 8-Feet (Black Cord) Long. They are compatible with systems from Covidien, DeVilbiss, ResMed, Fisher & Paykel, and Philips Respironics. Compatibility Information: COVIDIEN / PURITAN BENNETT - Compatible with all Sandman Systems including the Sandman Intro, Sandman Info, S [read more]
The BiPAP Auto with BiFlex adjusts IPAP/EPAP pressures on a breath-by-breath basis to provide the lowest pressures possible for an optimal sleep experience without discomfort. In addition the BiPAP Auto's Bi-Flex technology softens airflow on inhalation and exhalation to provide increased pressure relief, making breathing feel more comfortable and natural. Finally the BiPAP Auto offers advanced reporting with an Encore Pro SmartCard. [read more]
These foam filters are designed for use on several of Respironics Tranquility BiPAP machines. These filters are reusable; they should be cleaned on a regular basis and replaced when worn or damaged. Dimensions: Approximately 4.25 inches long by 4.5 inches wide and have a slightly curved rectangular shape. Compatibility: Respironics Tranquility Quest Respironics Tranquility Auto [read more]
This is the original Black Premium Headgear designed for use with all EasyLife CPAP/BiPAP Masks. The headgear features durable Lycra construction with breathable, lightweight straps and is highly adjustable. The wide-band design and absence of stitching where the headgear meets the skin helps to eliminate over-tightening, pinching, and strap marks. Usage Information: EasyLife Headgear can be [read more]
BLUE Gel Nasal Cushions and SST Comfort Flaps are supplied with all ComfortGel BLUE Nasal CPAP/BiPAP Masks. They are also compatible with ComfortGel "Original" NASAL CPAP/BiPAP Masks. The BLUE Gel Nasal Cushion features a new generation, soft, pliable gel that readily adapts to facial features, thereby simplifying fit and contributing to overall comfort. The Secure Seal Technology (SST) [read more]
BLUE Gel Nasal Cushions are supplied with all ComfortGel BLUE Nasal CPAP Masks. They are also compatible with ComfortGel "Original" NASAL Masks. The BLUE Gel Nasal Cushion features a new generation, soft, pliable gel that readily adapts to facial features, thereby simplifying fit and contributing to overall comfort. Sizing Information: The ComfortGel BLUE Nasal mask uses three diff [read more]
This stylish two tone travel bag is designed to carry the PR System One CPAP/BiPAP as well as the integrated heated humidifier, power supply and cords, tubing and CPAP/BiPAP mask. It includes an adjustable shoulder strap for easy lifting. [read more]
This is the standard carrying case that comes with all MSeries CPAP/BiPAP systems. It features an expandable front pocket with velcro tabs to hold manuals, masks, or tubing. Inside there are two compartments -- one for your CPAP/BiPAP machine and integrated humidifier, and one for power cords. The bag measures approximately 12" x 10" x 5" and includes adjustable shoulder strap stra [read more]
This is a replacement base plate with gasket for use with all REMstar and H2 Series CPAP/BiPAP Humidifier Chambers. The plastic chamber itself is not included. [read more]
PENNY PROMOS - Add Great Extras to This Item for A Penny in Your Shopping Cart!
Improved comfort starts as soon as you put on Respironics' ComfortClassic. A dual-thickness silicone cushion and an air-filled membrane create a comfortable seal. A dual-position gel spacer molds to the wearer's forehead for even greater comfort and stability. [read more]
The ComfortFull 2 Full Face CPAP/BiPAP Mask from Respironics includes all the great features of the original Comfort Full with welcome refinements including improved cushion design, more durable light-weight construction materials, a better elbow swivel, and enhanced adjustment mechanisms to improve your sleep and enhance durability. [read more]
The ComfortFusion combines Respironics' years of mask design experience with an understanding and appreciation of patient needs. You'll love the superior seal that results from the pairing of the soft, cushion and the StabilitySelector, along with the soft forehead pad and unique, soft Fusion Headgear. This DuoPack / FitPack Package includes two cushions so that you can have a spare on hand or try multiple sizes to ensure you get your best fit. [read more]
The ComfortFusion combines Respironics' years of mask design experience with an understanding and appreciation of patient needs. You'll love the superior seal that results from the pairing of the soft, cushion and the StabilitySelector, along with the soft forehead pad and unique, soft Fusion Headgear. [read more]
PENNY PROMOS - Add Great Extras to This Item for A Penny in Your Shopping Cart!
Building on the global success of the original ComfortGel Nasal Mask, Philips Respironics has combined the best qualities of their time-proven gel masks with several highly regarded enhancements to establish a whole new level of mask performance with the ComfortGel BLUE.
The ComfortGel BLUE's new generation, soft, pliable blue gel cushion readily adapts to facial features, thereby simplifying [read more]
PENNY PROMOS - Add Great Extras to This Item for A Penny in Your Shopping Cart!
Building on the global success of the original ComfortGel Nasal Mask, Philips Respironics has combined the best qualities of their time-proven gel masks with several highly regarded enhancements to establish a whole new level of mask performance with the ComfortGel BLUE.
The ComfortGel BLUE's new generation, soft, pliable blue gel cushion readily adapts to facial features, thereby simplifying [read more]
Combining new ideas with proven technologies the ComfortGel Full Face CPAP/BiPAP mask brings the natural comfort and seal benefits of Respironics' gel technology -- and the convenience and practicality of a replaceable cushion design -- to full-face mask wearers. The comfortable, newly designed forehead cushion, enhanced StablitySelector® adjustment feature and renowned blue gel come [read more]
With a removable gel cushion and easy-to-clean design, the ComfortGel Full Face CPAP Mask combines new ideas with proven technologies to bring the natural comfort and seal benefits of Respironics' gel technology to full-face mask wearers. The added SST flap follows the most subtle contours of the face to provide a quick, comfortable seal. [read more]
The Comfort Gel Nasal Mask brings a new level of fit and comfort to CPAP and Bi-Level masks. ComfortGel's exciting new approach combines premium comfort features with a host of new innovations to create a fully customizable gel mask. The ComfortGel Nasal Mask is easier to fit right the first time - even if you're a hard-to-fit patient. It's "silent" exhalation port dispers [read more]
The Comfort Gel Nasal Mask brings a new level of fit and comfort to CPAP and Bi-Level masks. ComfortGel's exciting new approach combines premium comfort features with a host of new innovations to create a fully customizable gel mask. The ComfortGel Nasal Mask is easier to fit right the first time - even if you're a hard-to-fit patient. It's "silent" exhalation port dispers [read more]
This is the complete ComfortGel ORIGINAL Nasal CPAP/BiPAP Mask Frame with forehead support arm and bar. It does not include the cushion, comfort flap or headgear. [read more]
The ComfortLite 2 includes soft, sleep-friendly, fabric headgear, three cushion options, light and very durable construction, and a host of other small but crucial improvements over the original. [read more]
With it's unique adjustable arm and silicone forehead pad, the Comfort Select Nasal Mask creates a personalized, secure and comfortable, leak-free fit. Respironics' Deluxe Headgear stays in place without overtightening to reduce mask leaks and painful pressure points. New Quick Clips make the mask easy to put on and take off without loosening any straps so once you've found your perfect fit you c [read more]
The M-Series Compact Travel Bag with Mask Pouch will hold any MSeries CPAP/BiPAP system with hose and a mask when packing it into another piece of carry-on luggage. The included zippered mask pouch measures approximately 10x10 inches. This Travel Pack will not hold the MSeries CPAP with humidifier attachment. [read more]
These Cradle Cushions are designed for us with all OptiLife CPAP/BiPAP masks. OptiLife Cradle Cushions offer a non-invasive direct seal interface that includes a generous landing area and deep arc for excellent comfort and seal. [read more]
Respironics Deluxe Headgear with Velcro tabs easily adjusts in eight places for a secure, custom fit. It evenly distributes tension, adds stability and helps prevent mask leaks. Deluxe Headgear is provided as standard on ProfileLite, ComfortClassic, and ComfortSelect CPAP/BiPAP masks. It can also be used with most other Comfort Series masks. [read more]
These Direct Seal Cushions fit all Comfortlite & Comfortlite 2 CPAP/BiPAP Masks. The Direct Seal's curved cushions seal gently, but securly on the nostrils without actually inserting into them. [read more]
PENNY PROMOS - Add Great Extras to This Item for A Penny in Your Shopping Cart!
The EasyLife Nasal CPAP Mask introduces Philips Respironics patented AutoSeal technology engineered to create a secure seal while nearly eliminating the need for manual adjustments.
The EasyLife's unique dual-cushion design actually includes two distinct elements. The soft inner cushion readily adapts to facial conours creating an instant, self-adjusting nasal seal. The outer cushion provide
[read more]
PENNY PROMOS - Add Great Extras to This Item for A Penny in Your Shopping Cart!
The EasyLife CPAP Mask with AutoSeal creates a secure, robust seal while nearly eliminating the need for manual adjustments. EasyLife's unique dual-cushion includes two distinct elements -- an inner cushion that creates an instant, self-adjusting seal; and an outer cushion that provides comfortable overall support on the face and forehead. EasyLife's wide-band headgear helps to eliminate overtightening, pinching and strap marks. [read more]
Track your sleep data and understand your therapy like never before with Encore Pro SmartCards and EncoreViewer software. This card is for use with all Respironics SmartCard enabled machines such as the M-Series REMstar Plus, M-Series REMstar Pro, M-Series REMstar Auto, M-Series BiPAP Auto, REMstar Auto, REMstar Pro, REMstar Pro2, BiPAP Pro, BiPAP Synchrony, etc. No other card can be used with Re [read more]
Therapy tracking and reporting software is a valuable tool for CPAP/BiPAP users, therapists and healthcare professionals alike. Respironics exclusive EncoreViewer software has been developed with patients in mind so it is user friendly and powerful while not being overwhelming. EncoreViewer software analyzes data recorded by Respironics CPAP and BiPAP machines and generates therapy reports. In [read more]
The ultra quiet EverFlo Q Oxygen Concentrator with OPI combines a small form factor with lightweight durable construction in a brilliant home oxygen therapy solution. Offering liter flows up to 5-LPM the EverFlo Q is powerful and easy to use. We offer the EverFlo with OPI (Oxygen Percentage Indicator) to ensure you're always receiving optimum oxygen levels as prescribed! The EverFlo is easy to maintain and durable with a long lasting 5-year manufacturer's warranty. [read more]
The EverGo from Respironics lets active people be active without worrying about running out of oxygen. Its extra long 8-hour battery life, increased 1050 ml per minute oxygen capacity, lightweight design (less than 10 pounds), and easy-to-use touch screen display means you can be free to enjoy life your way. The EverGo is approved for use on most major airlines and the included carry bag and travel cart means it's easy to take with you everywhere you go. [read more]
This external power supply is for use with all M-Series CPAP/BiPAP Machines from Respironics including the M-Series REMstar Plus, M-Series REMstar Pro, M-Series REMstar Auto, M-Series BiPAP Pro, M-Series BiPAP Auto, etc. It is rated from 100-240 V, 50-60 Hz and can be used without a voltage converter in most countries worldwide. Usage Information: The power cord/cable, which plugs into the w [read more]
This external power supply is for use with all PR System One CPAP/BiPAP machines. This universal power supply is rated from 100-240 V, 50-60 Hz and can be used without a voltage converter in most countries worldwide. Usage Information: The power cord/cable, which plugs into the wall, is not included. If you are missing that cord please see Cord Part 1005894 elsewhere on this site. [read more]
Facial hair, dentures, nasal bridge breakdown, facial irregularities, and claustrophobia are issues that can make sleep therapy difficult. The FitLife Total Face CPAP Mask offers a comfortable and easy to use solution for men and women facing these challenges. FitLife creates a robust seal around the less pressure-sensitive perimeter of the face to avoid disrupting the wearer's view. Its advanced headgear with easy-to-use snap clips and EZ Peel tabs is easy to put on and take off. [read more]
This Kit includes two flapper valves, one funnel and one vent cover. It is designed for use with all REMstar and H2 Series CPAP/BiPAP Humidifier Chambers. [read more]
These black foam filters are designed for use on some of Respironics older CPAP machines including the Choice, Choice LS & REMstar. These filters are reusable; they should be cleaned on a regular basis and replaced when worn or damaged. Dimensions: Oval Shaped. Approximately 6 inches long, 4.75 inches wide. There is a small notch on one edge of each filter. Compatibility: Respir [read more]
These are original Philips Respironics branded dark gray / black reusable foam filters filters. For optimal performance foam filters should be washed weekly and replaced every 2-3 months or as needed. Dimensions: Approximately 1.75 (1-3/4) inches long by .875 (7/8) inch wide. Compatibility: All PR System One REMstar CPAP Machines (PR System One REMstar Plus, PR System One REMstar P [read more]
These foam filters are designed for use on several of Respironics older BiPAP machines including the Duet, Synchrony & Harmony Series. These filters are reusable; they should be cleaned on a regular basis and replaced when worn or damaged. Dimensions: Approximately 4.75 inches long by 2.25 inches wide. Compatibility: Respironics Duet LX Respironics Duet Respironics BiPAP [read more]
These foam filters are designed for use on several of Respironics older CPAP machines including the Solo LX, REMstar LX, Aria LX and Virtuoso LX Series. These filters are reusable; they should be cleaned on a regular basis and replaced when worn or damaged. Dimensions: Approximately 2.375 inches long, 3.375 inches wide Compatibility: Respironics Solo Series Respironics Solo LX [read more]
These soft foam forehead spacers are available as an alternative to the standard gel spacers included with ComfortClassic CPAP/BiPAP masks. They are softer than the gel spacers and may need to be replaced more frequently. [read more]
This part is designed for use on all ComfortGel "Original" Nasal, ComfortGel FULL, ComfortSelect, ComfortFull and ComfortFull 2 CPAP/BiPAP masks. It includes the horizontal forehead support bar and the forehead pad. This product DOES NOT include the vertical bar that attaches the forehead support bar to the main body of the mask. [read more]
This is the horizontal forehead support bar and premium forehead pad for Respironics ComfortFusion CPAP/BiPAP masks. Individual forehead pads may also be purchased separately. [read more]
This dual-textured cushion with SST Flap is designed for use with all FullLife Full Face CPAP/BiPAP Masks. It includes integrated exhalation ports, on the front of the cushion, to make operation exceptionally quiet; and support ribs along the sides of the cushion provide extra stability and help prevent leaks, especially in problem areas around the eyes. Sizing Information: The FullLife mask [read more]
These Full Face Gel Cushion & SST Comfort Flap Packs are for use on all ComfortGel Full CPAP/BiPAP masks. The ComfortGel FULL uses a different frame for each size so each cushion/flap pack will only fit the corresponding mask size. Only purchase the cushion/flap pack size that matches your mask size. [read more]
These full face gel cushions are designed for use on all ComfortGel Full CPAP/BiPAP masks. The ComfortGel FULL uses a different frame for each size so each cushion will only fit the corresponding mask size. Only purchase the cushion size that matches your mask size. An SST Flap is used to secure the gel cushion to the frame. If you need a replacement flap consider the Cushion & Flap pack avai [read more]
Respironics FullLife Mask incorporates a durable, lightweight frame with a smaller overall design to create a comfortable mask ideal for people who need a full face mask without the extra weight. The FullLife eliminates the need for forehead support so there is less contact on the face and users have a clear line of sight. This DuoPack / FitPack includes two or three cushions so that you can have a spare on hand or try multiple sizes to ensure you get your best fit. [read more]
Respironics FullLife Full Face Mask incorporates a durable, lightweight frame with a smaller overall design to create a comfortable mask ideal for people who need a full face mask without the extra weight. The FullLife eliminates the need for forehead support so there is less contact on the face and users have a clear line of sight. Dual-textured cushions and an SST flap create a robust seal while integrated exhalation ports make the mask exceptionally quiet to use! [read more]
Fusion Headgear with EZ Peel Tabs uses Lycra stretch fiber straps that stand up to long term use and repeated washing. Fusion Headgear is provided as standard on all ComfortFusion CPAP/BiPAP masks. It can also be used with most other Comfort Series masks. [read more]
This forehead pad is designed for use with all TrueBlue Nasal CPAP/BiPAP Masks. The pad's three premium blue gel cushions evenly distribute pressure across the forehead to enhance mask comfort. The forehead pad clips into the forehead support bracket for easy removal and insertion. [read more]
These Gel Forehead Spacers are made for use with the ProfileLite Gel Nasal CPAP/BiPAP Mask. Three sizes -- Small, Large and ExtraLarge -- are available. Any spacer size will fit any size ProfileLite mask. The Small spacer is included standard with all Petite & Small ProfileLite Masks; the Large spacer is included with all other ProfileLite mask sizes. There is no Medium size Gel Forehead Spac [read more]
The ComfortClassic Gel Forehead Spacer Kit includes two durable replacement forehead spacers (Small & Medium) to fit all ComfortClassic CPAP/BiPAP Masks. [read more]
Affordable, compact, and convenient, the GO2 is a great personal oximeter that provides accuracy comparable to the expensive oximeters used by healthcare professionals. The highly durable GO2 Fingertip Oximeter is an ideal oxygen and heart rate monitoring companion with any easy to read backlit LCD display. Whether you're taking a walk, enjoying a round of golf, biking, hiking, running, or flying GO2 provides the peace of mind you need to live your way. [read more]
Designed specifically to conform to the unique contours of the male facial structure the GoLife For Men CPAP/BiPAP Mask includes a minimalist frame with contour arms that hug the face to maintain a secure and stable seal even with movement during sleep. The GoLife's self-adjusting nasal pillows provide a flexible, hassle free seal and GoLife's soft, pre-formed headgear is easy to put on and take off without detaching any clips or straps. [read more]
Designed specifically to conform to the smaller contours of the female face the GoLife For Women CPAP/BiPAP Mask includes a minimalist frame and soft contour arms that hug the face to maintain a secure and stable seal even with movement during sleep. GoLife's self-adjusting nasal pillows provide a flexible, hassle free seal; and GoLife's For Women's smaller, lilac-and-purple, soft sided headgear provides a comfortable fit without the need for a chin band or overtightening. [read more]
The goLITE BLU from Philips Respironics / Apollo features a compact, cordless design with diffusion optics to provide softer, more even light therapy. The goLITE BLU's wider treatment field provides effective blue light therapy in as little as 15-minutes a day and because it's cordless you can take it with you wherever you go. The goLITE BLUE helps treat the symptoms of Seasonal Affective Disorde [read more]
This is the Gray Entrainment Valve Tube Swivel that comes with all ComfortFull 2 and the ComfortGel FULL Face CPAP/BiPAP Masks. It fits between the clear mask elbow and the breathing tube which attaches to your CPAP/BiPAP machine. [read more]
This replacement headgear will fit all ComfortLite 2 CPAP/BiPAP masks. The ComfortLite 2's unique halo headgear design is made of a soft, sleep-friendly fabric. It is available in one size and is adjustable to fit most users. [read more]
EasyLife headgear is designed to be used with or without headgear clips. Using Headgear Clips like these with your EasyLife CPAP/BiPAP Mask makes it easier to put the mask on and take the mask off without the need for continual headgear adjustments. [read more]
GoLife headgear is made of soft fabric straps in two-tone colors. Two sizes are available -- a larger size designed to fit most men, and a smaller size designed to fit most women. In addition GoLife For Women Headgear sits lower on the back of the head to help prevent slippage and provide a better fit with many women's hairstyles. Any style of GoLife Headgear will fit any GoLife Series CPAP/BiPAP [read more]
TrueBlue Headgear is designed to fit more loosely than traditional CPAP/BiPAP headgear. The headgear features wide, soft fabric straps that converge into a single back panel. A crown strap is included for added stability. TrueBlue headgear is avaialble in two sizes -- the Standard headgear is provided in all mask packs. Reduced Size headgear is available for more petite users and will work with a [read more]
These headgear clips are designed for use with all FitLife Total Face CPAP/BiPAP Masks. They thread onto the headgear strap and then clip onto the frame to ensure that the mask is easy to attach and remove. [read more]
This headgear is designed for use with all FullLife Full Face CPAP Mask. The soft headgear straps are color coded and numbered for easy fitting and include EZ-Peel tabs for quick removal and application. The chin support band is included to improve mask stability. FullLife headgear does not use any buckles or clips so there are no pressure points or hard edges to worry about. [read more]
This headgear will fit all OptiLife CPAP/BiPAP Masks. Optilife headgear has soft straps, no buckles and a unique chin support band to improve stability and comfort. It is easy to adjust and reduces sore spots. [read more]
Light Blue FitLife headgear is designed for use with all FitLife Total Face CPAP/BiPAP Masks. The headgear is made of soft, Lycra and foam materials with wide bands for a comfortable fit without pinching or rubbing. EZ Peel Tabs make the headgear easy to adjust and Snap Clips are included so that the headgear is easy to put on and remove. Sizing Information: FitLife headgear is available in t [read more]
Respironics designed the REMstar Heated Humidifer to work exclusively with the REMstar line of CPAP/BiPAP Systems. The Humidifier sits beneath the CPAP/BiPAP machine creating a stylish, sophisticated, fully integrated unit that is easy to use, and easier to live with. Compatible with REMstar Plus, Pro, Pro2, BiPAP Plus, ST, Auto, etc. [read more]
These vent covers are designed for use with all REMstar and H2 Series CPAP/BiPAP Heated Humidifiers. [read more]
EasyLife Nasal Cushions feature a unique Auto-Sealing Dual Cushion system with an Inner Cushion to create an instant self adjusting seal and an Outer Cushion to eliminate pressure and rest lightly and comfortably against the face and forehead. (Because of the unique cushion design the EasyLife does not use a separate forehead support or pad.) These EasyLife Cushion packs include both the Inner [read more]
Respironics light blue ComfortGel full Premium Headgear has a simplified design for improved comfort and durability. It uses soft, wide Lycra stretch fiber straps to provide a stable fit that stands up to long term use. It is highly resistant to fraying and curling and eliminates the stitching which can cause irritation. This Headgear is provided as standard on all ComfortGel Full Face CPAP/BiPAP [read more]
The Travel CPAP/BiPAP Battery Pack is a brilliant power solution for people who need truly portable sleep therapy or a reliable backup for use during unexpected power outages. At the heart of the battery pack is a small and powerful lightweight Lithium Ion Battery like those found in many laptop computers. It weighs in at just 2-pounds! In addition each pack comes with a convenient Travel Bag, a Standard Power Cord for recharging from US Wall Sockets, and a DC Power Cord for connecting your Philips Respironics CPAP/BiPAP to the battery pack or any 12V DC power socket. [read more]
Compatible with nearly all CPAP, APAP, BiPAP and BiLevel systems from every manufacturer on the market Respironics' new Pure White Performance Tubing™ is 20% lighter and much more flexible than standard tubing. Its ultra-light design provides a more forgiving connection to the device so it is less likely to pull the interface and disrupt the seal! [read more]
The Long Life Rechargeable CPAP/BiPAP Battery Pack provides the ultimate in power, portability and convenience when combined with your CPAP/BiPAP system. Enjoy up to 24-hours of run time between charges! Take your CPAP/BiPAP on vacation, camping, on the road, or just about anywhere else! This package includes a carrying case, a standard AC Power Cord for recharging from US Wall Sockets, and a DC Cord for powering your Philips Respironics CPAP/BiPAP Machine from the battery pack or any 12V DC power socket. [read more]
The BiPAP Auto is the first device to combine auto adjusting pressure delivery with the breath-by-breath pressure relief of Bi-Flex. It's the most natural sleep therapy you can find, and it comes complete with Encore Pro SmartCard technology, ramp, auto-altitude adjustment and a host of other easy-to-use advanced features. Get Smart with an Auto-BiPAP The BiPAP Auto features a proactive, m [read more]
The M-Series REMstar CPAP is a great basic CPAP for use at home and on the road. It includes RAMP, Manual Altitude Adjustment and a wide pressure range of 4-20CM. M Series for Home, M Series for Travel The REMstar M Series sleep systems are ultra small, easy-to-use, and especially consumer-friendly. Their black brushed finishes resist scratching and look good wherever you place them; their [read more]
The ultra smart REMstar Auto M Series CPAP features Respironics' exclusive C-Flex Technology and is ultra-small, ultra-light and exceptionally easy to use. It includes a new simplified onboard navigation system, and great accessories like the Encore Pro SmartCard and an optional integrated heated humidifier. Get Smart with an Auto-CPAP The REMstar Auto M-Series is an Auto-CPAP machine whic [read more]
No matter how sophisticated a sleep system is, sometimes CPAP/BiPAP therapy can still cause dry mouth, nasal irritation and congestion. That’s why the REMstar M Series offers the comfort of heated and cool passover humidification with two fully integrated humidification units. The M Series humidifiers use a redesigned “hidden” water chamber that is easier to use, and easier t [read more]
The M-Series REMstar Plus CPAP is a great mid-featured CPAP for use at home and on the road. It includes RAMP, Manual Altitude Adjustment, C-Flex breathing technology, and a wide pressure range of 4-20CM. M Series for Home, M Series for Travel The REMstar M Series sleep systems are ultra small, easy-to-use, and especially consumer-friendly. Their black brushed finishes resist scratching an [read more]
The M-Series REMstar Pro CPAP is a great full-featured CPAP for use at home and on the road. It includes RAMP, Automatic Altitude Adjustment, C-Flex breathing technology, Encore Pro SmartCard with advanced therapy tracking, and a universal power supply for smooth operation around the world. M Series for Home, M Series for Travel The REMstar M Series sleep systems are ultra small, easy-to-u [read more]
The Millennium M10 Continuous Flow Oxygen Concentrator delivers up to 10LPM of oxygen. The Millennium M10 Oxygen Concentrator has fewer parts than any other concentrator sold today and is designed and built for reliability so that it is easy to use and easy to own. The Millennium M10 includes an Oxygen Percentage Indicator (OPI) offers viwual and audible alarms to ensure that the proper oxygen levels are always being delivered. [read more]
Respironics mushroom swivel headgear clips are made of softer materials, with a mushroom shaped head and more ergonomic grip area, than the older style black ball clip. Extensive testing has shown that the mushroom shaped design results in a significant increase in the life of the mask frame socket area as compared to the original design. These clips will work with all ComfortGel Nasal, ComfortGel Full, ComfortFusion, ComfortSelect, ComfortFull, and ComfortFull 2 CPAP/BiPAP masks. [read more]
These Nasal Cushions with Retaining Rings are designed for use with all ComfortFusion CPAP/BiPAP Masks. The ComfortFusion uses a single frame for all sizes so any ComfortFusion Cushion can be used on any ComfortFusion Mask Frame. [read more]
This replacement cushion and retaining ring will work on all ComfortSelect CPAP/BiPAP masks. The ComfortSelect uses a single size mask frame so any cushion will work on any sized ComfortSelect mask. [read more]
These Nasal Pillows Cushions fit Respironics Comfortlite and Comfortlite 2 CPAP/BiPAP masks. Nasal Pillows Cushions offer a highly contoured pillow interface that fits comfortably into the nostrils for an easy, leak-free seal. [read more]
These Nasal Pillows Cushions are designed for use with all GoLife For Men and GoLife For Women masks. GoLife Nasal Pillows are self-adjusting and optimally angled to provide a stable seal without the need for manual adjustments. Four Nasal Pillow sizes are available -- Petite, Small, Medium, Large -- and any size pillow will work with any GoLife Series CPAP/BiPAP Mask. [read more]
These Nasal Pillow Cushions are designed for use with all Respironics OptiLife CPAP/BiPAP masks. OptiLife Nasal Pillows provide a highly contoured pillow interface that fits comfortably into the nostrils for an easy, leak-free seal. [read more]
Use this sizing star to determine your best fit for ComfortLite and ComforLite 2 CPAP/BiPAP Mask Nasal Pillows Cushions. [read more]
PENNY PROMOS - Add Great Extras to This Item for A Penny in Your Shopping Cart!
The updated OptiLife MultiPack from Respironics offers two great interface options: nasal pillows and cradle cushions. OptiLife's highly contoured nasal pillows fit comfortably in the nostrils for an easy, leak free seal. OptiLife's cradle cushions provide a direct seal interface for those who prefer more minimal facial contact. Choose a mixed cushion pack and you can wear the nasal pillows one night and the cradle cushions the next! [read more]
PENNY PROMOS - Add Great Extras to This Item for A Penny in Your Shopping Cart!
The OptiLife CPAP/BiPAP Mask with Nasal Pillows fits your life and makes your life easier. OptiLife features a unique headgear design and a chin support band that allows it to be easily put on and adjusted with little effort and no buckles. In fact, OptiLife is so easy-to-use that the mask can be put into place with one hand. Plus, OptiLife is easy-to-clean and maintain, and it’s du
[read more]
These "Original" Gel Nasal Cushions with Comfort Flaps are supplied with all ComfortGel "Original" Nasal CPAP/BiPAP Masks; they are also compatible with all ComfortGel BLUE Nasal CPAP Masks. The Original Gel Nasal Cushion fits around the nose and can be custom molded for a better fit. The Secure Seal Technology (SST) Comfort Flap fits over the gel cushion to improve overall seal and help extend t [read more]
These "Original" Gel Nasal Cushions are supplied with all ComfortGel "Original" NASAL CPAP/BiPAP Masks; they are also compatible with all ComfortGel BLUE Nasal Masks. The Original Gel Nasal Cushion fits around the nose and can be custom molded for a better fit. Sizing Information: The ComfortGel Nasal mask uses three different mask frame sizes -- Petite, Small/Medium, and Large. Petite cushi [read more]
This is the headgear provided with ComfortFull CPAP/BiPAP masks when they were originally released. It has been replaced by Premium Headgear on newer ComfortFull 2 CPAP/BiPAP masks. This headgear can also be used with most other Comfort Series CPAP/BiPAP masks. Usage Information: Headgear clips are not included with this item so they must be purchased separately. [read more]
The Outlet Port Cover is used to cover the hole present on the back of M-Series CPAP/BiPAP systems when there is no humidifier attached to the unit. It covers the area where the tubing and airflow leave the machine so that tubing can be attached. [read more]
This part fits between the CPAP hose and the machine on Respironics Aira, Virtuoso, Aria LX and Virtuoso LX systems. It includes the Pressure Sensor Line which is a small clear tube shooting off from the main body of the part. [read more]
Philips Respironics System One BiPAP AUTO offers a wide pressure range (4-25cm), adjustable ramp, automatic altitude adjustment, data card, the latest BiFlex comfort technologies, and a universal power supply. In addition the BiPAP AUTO is an auto-adjusting bi-level so it will automatically adjust inhalation and expiration levels to ensure you enjoy the most comfortable and successful sleep experience. On top of this the BiPAP AUTO features resistance control technologies that adjust to different mask styles, and advanced event detection, reporting and response. [read more]
Philips Respironics System One BiPAP PRO offers a wide pressure range (4-25cm), adjustable ramp, automatic altitude adjustment, data card, the latest BiFlex comfort technologies, and a universal power supply. In addition the BiPAP PRO provides bi-level therapy -- with a high pressure on inhalation and low pressure on expiration -- to provide a more comfortable sleep experience than standard CPAP therapy. [read more]
With the BiPAP S/T Philips Respironics introduces a smaller, lighter, and quieter Non-Invasive Ventilatory (NIV) bi-level therapy system with improved humidification and patient comfort features. The System One BiPAP S/T includes a wide pressure range (4-25cm), adjustable ramp, automatic altitude adjustment, automatic leak compensation, Bi-Flex comfort technologies, and a universal power supply. In addition the BiPAP S/T provides the added security of a SPONTANEOUS TIMED mode which will initiate a breath, after a set period of time, if no patient breath is detected. [read more]
The System One Integrated Heated Humidifier is designed to bring added comfort and improved performance to all PR System One CPAP/BiPAP systems. When attached to your PR System One CPAP/BiPAP System the Integrated Heated Humidifier delivers optimum humidity - and ultimate comfort - throughout the night while also dramatically reducing rainout. The humidifier's Dry Box technology protects against accidental spillage and water damage. [read more]
Philips Respironics System One REMstar AUTO adjusts therapy levels throughout the night to ensure you are receiving optimum pressure for a comfortable, successful sleep experience. It includes wide pressure range, patient adjustable ramp, automatic altitude adjustment, SD data card, the latest A-FLEX comfort technologies, and a universal power supply. On top of this the REMstar AUTO features resistance control technologies that adjust therapy to different mask styles, and advanced therapy tracking capabilities -- including event detection, reporting and response! [read more]
Philips Respironics PR SystemOne REMstar is a great basic CPAP system at a super low price. It includes a wide pressure range, adjustable ramp, manual altitude adjustment, SD data card, and a universal power supply. In addition it includes basic therapy tracking and compliance reporting capabilities. [read more]
Philips Respironics System One REMstar PLUS is a great basic CPAP system at a super low price. It includes a wide pressure range, adjustable ramp, manual altitude adjustment, SD data card, C-FLEX comfort technologies, and a universal power supply. In addition it includes basic therapy tracking and compliance reporting capabilities. [read more]
Philips Respironics System One REMstar PRO brings a wide array of proven technologies together with great enhancements to create a truly intelligent CPAP system. The System One REMstar PRO includes a wide pressure range, patient adjustable ramp, automatic altitude adjustment, SD data card, the latest C-FLEX+ comfort technologies, and a universal power supply. On top of this the REMstar PRO features resistance control technologies that adjust therapy to different mask styles, and advanced therapy tracking capabilities -- including event detection and reporting. [read more]
These Cushion & Flap Packs are designed for use with all TrueBlue Nasal CPAP/BiPAP Masks. The TrueBlue's Premium Blue Gel Cushion works together with the thin, form fitting outer silicone Comfort Flap to create a personalized, self-adjusting seal. What Size Are You Currently Using? Cushion size is indicated on the bottom of the cushion. Flap size is indicated on the outer right side of t [read more]
The Premium Chinstrap, in Midnight Black, from Respironics helps prevent the nasal and oral drying that sometimes occurs during CPAP/BiPAP therapy. By holding your chin in its proper position during sleep the Strap encourages breathing through your nose. ^features~ Integrated Chin Cup is sewn into the strap providing soft and comfortable support without placing unnecessary tension on the [read more]
This Premium Forehead Pad is larger with more padding than Respironics original Comfort Series Forehead Pads. The Premium Forehead Pad is supplied as standard with all ComfortGel BLUE Nasal and ComfortGel FULL CPAP/BiPAP Masks; but it can also be used to replace the standard forehead pad on many other Comfort Series masks including the ComfortGel "Original" Nasal, ComfortFull 2, Comfort [read more]
Respironics Premium Headgear has a simplified design for improved comfort and durability. It uses soft, wide Lycra stretch fiber straps to provide a stable fit that stands up to long term use. It is highly resistant to fraying and curling and eliminates the stitching which can cause irritation. Premium Headgear is available in two sizes -- Standard and Reduced Size. The Standard size is provided on all ComfortGel NASAL, ComfortGel BLUE and ComfortFull 2 CPAP/BiPAP masks. [read more]
These premium silicone forehead pads attach to the forehead support bar on all ComfortFusion Nasal CPAP/BiPAP Masks. Both one and four packs are available. [read more]
These premium silicone forehead pads attach to the forehead support bar on all ComfortFusion Nasal CPAP/BiPAP Masks. Both one and four packs are available. [read more]
PENNY PROMOS - Add Great Extras to This Item for A Penny in Your Shopping Cart!
With its light, pillowy soft, gel cushion and forehead pad, the Profile Lite mask is extremely comfortable and uniquely customizable right out of the box. A simple, 10-minute fitting process molds the mask to your individual facial contours to create a customized foam seal which fits your face and only your face. [read more]
These black (dark gray) foam filters are designed for use with all (older) REMstar Series CPAP/BiPAP Machines. Foam filters are reusable and should be cleaned on a regular basis and replaced as needed due to wear and tear. These filters are original Respironics brand filters. Dimensions: Approximately 3.5 inches long by 1.5 inches wide. Compatibility: REMstar Lite CPAP REMstar Pl [read more]
This SD Data Card is compatible with all PR System One CPAP/BiPAP machines that include data card capabilities including the PR System One REMstar Plus, PR Sytem One REMstar Pro, PR System One REMstar Auto, PR System One BiPAP Pro, the PR System One BiPAP Auto, and the PR System One BiPAP ST. It is also compatible with SD Card enabled ResMed S9™ and DeVilbiss IntelliPAP CPAP/BiLevel Machine [read more]
This side panel is required when any PR System One CPAP/BiPAP machine is used without the integrated heated humidifier. [read more]
This Respironics Filter Cover/Silencer Cap snaps into place on the back of (Older) REMstar Series CPAP Machines with C-Flex. It is compatible with C-Flex systems including the REMstar Lite, REMstar Plus, REMstar Pro/Pro2, and REMstar Auto. It will not work with M-Series or PR System One machines. [read more]
This Respironics Filter Cover/Silencer Cap snaps into place on the back of REMstar Systems without C-Flex. It is compatible with REMstar Plus or REMstar Pro system without C-Flex. It will not work with M-Series or PR System One machines. [read more]
Respironics Silver Fleece CPAP/BiPAP Tubing Wrap is made of extra soft fleece to help insulate tubing, prevent rain-out, and enhance the overall sleep experience. Silver Fleece Hose Covers slide easily onto any standard 6-FT tube and fasten with Velcro to ensure a secure fit. Silver Fleece Tubing Wraps are compatible all major manufacturers systems. [read more]
This is the replacement elbow that attaches Simple Cushions to Respironics ComfortLite and ComfortLite 2 CPAP/BiPAP masks. [read more]
Use this sizing gauge to determine your best fit for ComfortLite and ComforLite 2 CPAP/BiPAP Mask Simple Cushions. Alternatively you can download and print out a sizing gauge directly from the following link: ComfortLite 2 CPAP/BiPAP Mask Sizing Gauge (PDF) [read more]
These Simple Cushions fit Comfortlite and Comfortlite 2 CPAP/BiPAP Masks. The Simple Cushion slides over the tip of the nose reducing bulk and pressure points common with most nasal masks. A Simple Cushion Elbow is included. [read more]
Respironics Simple Strap Headgear is designed as an alternative headgear for many nasal and full face CPAP/BiPAP masks. It will work with most Comfort Series masks as well as the ProfileLite, Gold Seal and reusable Contour masks. It includes a QuickClip to make the heagear easier to put on and take off without losing your size adjustments. [read more]
Simplicity's small, lightweight cushion works with no contact to the nasal bridge eliminating common sources of pressure and irritation. In addition the Simplicity's built-in exhalation port produces a quiet exhalation flow eliminating airflow to the eyes and dispersing air gently without disturbing the CPAP patient or bed partners. [read more]
This ComfortGel Full Sizing Gauge from Respironics can be used to determine your best size for the ComfortGel Full CPAP/BiPAP Mask. [read more]
Designed exclusively for Philips Respironics SystemOne CPAP/BiPAP machines this Slim 15-MM White Performance Tubing is 20% lighter and much more flexible than standard tubing. Its ultra-light design provides a more forgiving connection to the device so it is less likely to pull the interface and disrupt the seal! Usage Information: This tubing is only compatible with 2011 and newer edition [read more]
These SST Comfort Flaps are used to secure the gel cushion onto the ComfortGel Full CPAP/BiPAP mask frame. The ComfortGel FULL uses a different frame for each size so each SST Flap will only fit the corresponding mask size. Only purchase the flap size that matches your mask size. [read more]
The Sure Seal Technology (SST) Comfort Flap is designed to fit over the gel cushion on all ComfortGel (Original) and ComfortGel BLUE Nasal CPAP/BiPAP Masks to ensure the cushion is properly attached to the mask, improve fit, and extend overall cushion life. Sizing Information: The ComfortGel Nasal mask uses three different mask frame sizes -- Petite, Small/Medium, and Large. Petite flaps wil [read more]
This is the soft, silicone pad that attaches to the forehead support bar on all ComfortGel "Original" NASAL, ComfortSelect, ComfortFull, and ComfortFull 2 masks. It can also be used to replace the Premium Forehead Pad all ComfortGel BLUE, and ComfortGel FULL CPAP/BiPAP masks. [read more]
This Swivel Tubing with Exhalation Port is designed for use with all GoLife For Men and GoLife For Women CPAP/BiPAP Masks. The tubing is 18 inches long and includes a 360 degree swivel to allow freedom of movement and maintain a proper seal during sleep. An exhalation port, at the top of the tubing near the mask frame, diffuses air quietly away from the user. Tubing can be held in place, on beddin [read more]
These "Talon" Headgear Clips are designed for use with all TrueBlue Nasal CPAP/BiPAP Masks. The clips allow you to easily attach and detach the mask's headgear straps without having to make additional adjustments to find a proper fit. Talon Headgear Clips are made from a soft, flexible plastic that snaps into place easily and can be twisted to detach. [read more]
This unique, open-styled mask offers a great alternative for people who can't tolerate nasal pillow, nasal cushion or traditional full face masks. The Total Face Mask includes a clear faceplate designed to give the wearer a free and unobstructed view; and a flexible, soft-sealing layer inside the mask inflates during use to create a gentle but effective seal. Complete facial coverage means there are no pressure points on the nose, mouth, forehead or nasal passages. [read more]
The TrueBlue CPAP/BiPAP Mask's unique freeform spring sits between the mask frame and cushion adjusting automatically to user movements to maintain stable, leak free seal. The mask's premium blue gel nasal cushion molds naturally to the shape of your nose while the cushion's soft outer flap expands and contracts to improve fit and comfort. TrueBlue's soft, wide-band headgear is designed to be worn more loosely than traditional CPAP/BiPAP headgear to improve overall comfort. [read more]
The TrueBlue CPAP/BiPAP Mask's unique freeform spring sits between the mask frame and cushion adjusting automatically to user movements to maintain stable, leak free seal. The mask's premium blue gel nasal cushion molds naturally to the shape of your nose while the cushion's soft outer flap expands and contracts to improve fit and comfort. TrueBlue's soft, wide-band headgear is designed to be worn more loosely than traditional CPAP/BiPAP headgear to improve overall comfort. [read more]
This Tubing Elbow Adapter allows you to connect a standard breathing tube to most CPAP/BiPAP machines at an angle to the machine so there is less stress on the tubing connection and the pathway from machine to bed is more convenient. It is compatible with most machines from Philips Respironics, ResMed, Fisher & Paykel, Puritan Bennett, Covidien, and DeVilbiss Healthcare. Compatibility In [read more]
These ultra fine filters are designed for use on some of Respironics older CPAP machines including the Choice, Choice LS & REMstar. Ultra fine filters are disposable; for optimal performance they should be changed regularly when they appear soiled or discolored. Dimensions: Oval Shaped. Approximately 6 inches long, 4.75 inches wide. Compatibility: Respironics Choice Respironi [read more]
These are original Philips Respironics branded disposable ultra fine filters. For optimal performance ultra fine filters should be changed regularly when they appear soiled or discolored. Dimensions: Approximately 1.75 (1-3/4) inches long by .875 (7/8) inch wide. These filters were originally manufactured with a small tab on the long edge. Respironics no longer includes the tab as it has [read more]
These disposable white filters are designed for use on several of Respironics older BiPAP machines including the Duet, Synchrony & Harmony Series. These filters are disposable and should be changed regularly when soiled. Dimensions: Approximately 4.75 inches long by 3.25 inches wide. There is a tab on the center of each filter for easy insertion and removal from the machine. Compatibility [read more]
These disposable white filters are designed for use on several of Respironics older BiPAP machines including the BiPAP, BiPAP S, BiPAP ST, SE III, and BiPAP ST 30. These filters are disposable and should be changed regularly when soiled. Dimensions: Approximately 5 inches long by 8 inches wide. Compatibility: Respironics SE III Respironics BiPAP Respironics BiPAP-S Respiron [read more]
These ultra fine filters are designed for use on several of Respironics older CPAP machines including the Solo LX, REMstar LX, Aria LX and Virtuoso LX Series. These filters are disposable and should be changed regularly when soiled. Dimensions: Approximately 2.375 inches long, 3.375 inches wide. There is a tab on the center of each filter for easy insertion and removal from the machine. C [read more]
These ultra fine filters are designed for use on several of Respironics Tranquility BiPAP machines. These filters are disposable; for optimal performance they should be changed regularly when they appear soiled or discolored. Dimensions: Approximately 4.25 inches long by 4.5 inches wide and have a slightly curved rectangular shape. Compatibility: Respironics Tranquility Quest Res [read more]
This DC Adapter Cable can be used, with a standard 12V DC Power Cord, to attach any CPAP/BiPAP machine directly to a 12 volt DC battery using "alligator" style clips. One end of the cable fits over the "cigarette" style plug on the end of a 12V DC Power Cord, the other end has two clips for direct connection to a battery. Please check your user manual to confirm any special DC [read more]
This valve that helps prevent the back flow of oxygen (O2) or water from the patient circuit into CPAP/BiPAP systems when the machine is turned off. It helps protect the system from water back flow -- from the breathing tube or an external humidifier -- which can cause permanent damage to the machine and oxygen back flow which can be a fire hazard. [read more]
The Long Life Rechargeable CPAP/BiPAP Battery Pack provides the ultimate in power, portability and convenience when combined with your CPAP/BiPAP system. Enjoy up to 24-hours of run time between charges! Take your CPAP/BiPAP on vacation, camping, on the road, or just about anywhere else! Each battery pack includes a carrying case and a standard AC Power Cord for recharging from US Wall Sockets. [read more]
This Data Card Reader is designed to read the Encore SmartCard Data Cards used in many older Respironics CPAP/BiPAP machines including all M-Series machines and older Encore enabled REMstar machines. It uses a USB interface to connect to computers for data retrieval. [read more]
The Wake-up Light from Philips wakes you up in a natural way, using light that increases gradually. With a built in FM radio, alarm clock, and natural sound tracks the Wake-up Light makes waking up a pleasant, refreshing experience. In addition the Wake-up Light includes a sundown simulator so that you can fall asleep comfortably as the light and music fades. [read more]
These humidifier water chambers are designed to work with all M-Series Heated & Cool Passover Humidifiers. Compatibility Information: Two chamber designs are available for MSeries Humidifiers: the R2B (Part 1003757) with side-by-side openings and the R3B (Part 1003758) with staggered openings. If you are unsure of which chamber you need, review the MSeries Chamber Differences Guide (PDF [read more]
This humidifier chamber is designed for use with the PR System One CPAP/BiPAP Integrated Heated Humidifier. The water chamber can be disassembled for easy cleaning and is dishwasher safe. It has a recommended maximum water capacity of 1-1/3 cups (325 ml). [read more]
This replacement water chamber kit includes the water chamber with baseplate, two flapper valves, a lid and funnel. It is designed for use with all REMstar and H2 Series CPAP/BiPAP Heated Humidifiers. Usage Information: In early 2007 Respironics updated the design of the REMstar Heated Humidifier coupling with a new "flapper valve." The new design is intended to minimize the chance of water [read more]
This Whisper Cap snaps on to the existing Air Intake Port on the back of all M-Series CPAP and BiPAP systems. In tests the Whisper Cap reduced overall sound levels by 3dB, on average. Sound measured 18.2dB at 5cm and 25.3dB at 10cm pressure levels. [read more]
This Whisper Swivel is used to remove excess waste gasses from some older Respironics CPAP/BiPAP masks. It should only be used on Reusable Silicone Contour Masks, Gold Seal Masks, and some older ProfileLite Masks that did not come with a swivel. DO NOT use this Whisper Swivel on any other masks than those mentioned. [read more]
These white ultra fine fiber filters are designed for use with all (older) REMstar Series CPAP/BiPAP Machines. There is a tab on the center of each filter for easy insertion and removal from the machine. Ultra Fine filters are disposable and should be changed regularly when soiled. These filters are original Respironics brand filters. Dimensions: Approximately 3.5 inches long by 1.5 inches w [read more]
|
||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
