Standard Water Chamber for H4i™ Heated Humidifiers
8 Total Reviews
- Brand:ResMed
- Part Numbers:26952
- Warranties:30-Day Manufacturer's Warranty
This standard humidifier water chamber (with a frosted tub) will last for 6-months on average with proper care and maintance. It is compatible with all H4i Heated Humidifiers as well as HumidAire 3i (H3i) Heated Humidifiers that have been upgraded using the H4i Flip-Top Lid with Seal (Part 26953) or the H3i-to-H4i Upgrade Kit (Discontinued).
Usage Information: Each chamber will hold 390 ml of water (when properly filled to the fill line). Chambers should be filled with clean water each night. Using distilled water is not required, but it will maximize the life of the chamber and reduce mineral deposits. The metal heating plate on the bottom of the chamber should NOT be removed for cleaning.
GENERAL SPECS
- Manufacturer:ResMed
- Part Numbers:26952
- Warranties:30-Day Manufacturer's Warranty
- HCPCS Codes:A7046
- GTIN Codes:00619498269525
- FLEX SPENDING:Can be purchased with FSA & HSA Cards
PHYSICAL SPECS
- Materials:Latex Free
-
Aways a good experience
My original water chamber (9 years) was still working, but I was pushing my luck with it, so I purchased a new one from cpapXchange to be on the safe side. I have purchased many items from this vendor and have always had a smooth experience. Prices are the same as everywhere else (I checked) and they even delivered it faster than expected from the NE USA. This is my go to place for cpap parts and supplies.
Written by ertrevino, Richardson, Texas -2020-06-28 -
Nose less crusty in the morning
Works fine, no leaks, seems solid. In the morning, my nose is much less dry and crusty.
Written by BlueCheetah-19099, Ohio -2020-05-24 -
Humidity container
Ordered it and before I knew it it was here Works great
Written by dennispresleycode3, -2019-05-21 -
Good transaction
Good price. Arrived quickly. Thank you.
Written by kmansion, -2019-02-11 -
Like new!
Fixed My husbands Cpap machine It runs like a new one. Thanks!
Written by joanb-87759, -2018-04-16 -
Water Chamber
Product needed some shims to stop noise from air leaking. Once installed, everything is fine.
Written by Ray T, -2014-01-27 -
Poor construction
The interlocking plastic that holds the heat exchange plate to upper body of the container fails within 8 to 12 months. This typically occurs without warning and results in the container leaking water.
Written by R Sanford, -2013-06-07 -
Same tank as sold by local medical supplier but cheaper
No difference between this tank and the tank sold by my local medical supply outfit, other than this one costs me far less. My last tank lasted several months before developing a leak for some reason.
Written by wamaruna, -2012-04-08
